If you set up the printer using the Quick Start Guide, you can read this
manual for more detailed information on how to operate the printer.
Once you are familiar with the printer, you'll find the On-Line Guide
helpful for finding quick answers to any questions you may have about
basic operational functions.
The rest of this section describes the contents and conventions of this
manual.
Contents
This manual includes all the information you need to set up and operate
your printer in several easy-to-read chapters.
Chapter 1, Introduction
Introduces you to the features of the printer, and describes how this
manual is organized.
Chapter 2, Setting Up the Printer
Describes how to select a location for your printer, and how to unpack
and assemble it.
Chapter 3, Loading Paper
Describes how to select paper and how to load it into the printer. It also
shows you how to print on envelopes and thick paper.
Chapter 4, Using the Operator Panel
Explains how to control your printer using the buttons on the operator
panel.
Chapter 5, Using the Printer With Your Software
Describes how to use the printer with Windows. It also describes how to
install a printer driver and select a printer driver and select a printer
control mode.
Chapter 6, Maintaining the Printer
Describes how to clean the printer and replace the ink cartridge.
Chapter 7, Troubleshooting
Provides procedures to help you solve problems that may occur with the
printer.
Chapter 8, Customizing the Printer
Describes the printer's DIP switches and explains how you can
customize the factory default settings of the printer by changing these
DIP switches.
The appendix lists printer specifications. At the back of the book, you'll
find a glossary and an index.