KENWOOD KAC-9405 Owner's Manual

KENWOOD KAC-9405 Owner's Manual
0 Rating(s)
Read reviews

Owner's Manual for KENWOOD KAC-9405, downloadable as a PDF file.

Manual details

Immediate download after payment.
Delivered as a PDF file.
The manual has 2 pages
File size: 3.5 MB
Available language versions: English, Chinese Traditional
Different language versions may vary sligthly in file size and page count.

We guarantee that...

our manuals are complete,
our manuals are checked with antivirus,
We'll issue refund if the manual is damaged, incomplete or unreadable (our refund policy)

Sample pages

KAC-9405

KAC-9405M

4/3/2 CHANNEL POWER AMPLIFIER

INSTRUCTION MANUAL

4/3/2

5mm2AWG 10

· 12V

ACC ON

· DC

5mm2AWG 10

· 2

Installation /

Connection /

280 mm

240 mm

259 mm

ø 4.6

238

213

Accessories /

ø 4 x 16 mm

Self-tapping screws /

Speaker level input cable /

Hexagon wrench /

Installation board, etc. (thickness : 15 mm or more)

15 mm

M4 × 8 mm

Hexagon socket head cap screw

Dressing cover

Installation procedure

Since there are large variety of settings and

connections possible according to applications,

read the instruction manual well to select the

proper setting and connection.

1. Remove the ignition key and disconnect the

negative

· terminal of the battery to prevent

short circuits.

2. Set the unit according to the intended usage.

3. Remove the Dressing cover.

4. Connect the input and output wires of the

units.

5. Connect the speaker wires.

6. Connect the power wire, power control wire

and grounding wire following this order.

7. Install the installation fittings in the unit.

8. Attach the unit.

9. Attach the Dressing cover.

10. Connect the negative

· terminal of the

battery.

CAUTION

· Do not install in the below locations;

(Unstable location, In a location that interferes

with driving, In a location that gets wet, In a

dusty location, In a place that gets hot, In a place

that gets direct sunlight, In a location that gets

hit by hot air)

· Do not install the unit under the carpet.

Otherwise heat build-up occurs and the unit

may be damaged.

· Install this unit in a location which allows heat to

easily dissipate.

Once installed, do not place any object on top

of the unit.

· The surface temperature of the amplifier will

become hot during use. Install the amplifier in a

place where people, resins, and other substances

that are sensitive to heat will not come into

contact with it.

· This unit has cooling fan to decrease the internal

temperature. Do not mount the unit in a place

where the cooling fan and ducts of the unit are

blocked. Blocking these openings will inhibit the

cooling of the internal temperature and result in

malfunction.

· When making a hole under a seat, inside the

trunk, or somewhere else in the vehicle, check

that there is nothing hazardous on the opposite

side such as a gasoline tank, brake pipe, or wiring

harness, and be careful not to cause scratches or

other damage.

· Do not install near the dashboard, rear tray, or air

bag safety parts.

· The installation to the vehicle should securely

fasten the unit to a place in which it will not

obstruct driving. If the unit comes off due to a

shock and hits a person or safety part, it may

cause injury or an accident.

· After installing the unit, check to make sure that

electrical equipment such as the brake lamps,

turn signal lamps and windshield wipers operate

normally.

10.

WARNING

Remove the ignition key and disconnect the negative

· terminal of the

battery to prevent short circuits.

WARNING

Particular attention must be given to making good electrical

contact at the amplifier-output and speaker terminals.

Poor or loose connections can cause sparking or burning

at the terminals because of the very high power that the

amplifier can deliver.

CAUTION

· If sound is not output normally, immediately turn power off

and check connections.

· Be sure to turn the power off before changing the setting of

any switch.

· If the fuse blows, check wires for shorts, then replace the fuse

with one of the same rating.

· Check that no unconnected wires or connectors are touching

the car body. Do not remove caps from unconnected wires or

connectors to prevent short circuits.

· Connect the speaker wires to appropriate speaker connectors

separately. Sharing the negative wire of the speaker or

grounding speaker wires to the metal body of the car can

cause this unit to fail.

· After installation, check that the brake lamps, turn signal lamps

and windshield wipers work properly.

WARNING

To prevent fire caused by a short in the wiring,

connect a fusible link or breaker nearby the

battery's positive terminal.

7 Power wire and Speaker wire connection

Center unit (CD receiver, etc.)

A.ch Right

A.ch Left

B.ch Right

B.ch Left

Stereo /

Bridged /

A.ch

B.ch

Power control wire

Battery

Ground wire

Battery wire

Protective fuse

Safety precautions

WARNING

To prevent injury or fire, take the following precautions:

· Mounting and wiring this product requires skills and

experience. For safety's sake, leave the mounting and

wiring work to professionals.

· When extending the ignition, battery, or ground wires,

make sure to use automotive-grade wires or other wires

with the range of 5 mm² (AWG 10) or more to prevent

wire deterioration and damage to the wire coating.

· To prevent a short circuit, never put or leave any metallic

objects (such as coins or metal tools) inside the unit.

· If the unit starts to emit smoke or strange smells, turn off

the power immediately and consult your Kenwood dealer.

· Do not touch the unit during use because the surface of

the unit becomes hot and may cause burns if touched.

CAUTION

To prevent damage to the machine, take the following

precautions:

· Be sure the unit is connected to a 12V DC power supply

with a negative ground connection.

· Do not open the top or bottom covers of the unit.

· Do not install the unit in a spot exposed to direct sunlight

or excessive heat or humidity. Also avoid places with too

much dust or the possibility of water splashing.

· When replacing a fuse, only use a new one with the

prescribed rating. Using a fuse with the wrong rating may

cause your unit to malfunction.

· To prevent a short circuit when replacing a fuse, first

disconnect the wiring harness.

NOTE

· If you experience problems during installation, consult

your Kenwood dealer.

· If the unit does not seem to be working right, consult

your Kenwood dealer.

Cleaning the unit

If the front panel gets dirty, turn off the power and wipe the

panel with a dry silicon cloth or soft cloth.

CAUTION

Do not wipe the panel with a hard cloth or a cloth

dampened by volatile solvents such as paint thinner and

alcohol. They can scratch the surface of the panel and/or

cause the indicator letters to peel off.

To prevent battery rise

When the unit is used in the ACC ON position without

turning the engine ON, it depletes the battery. Use it after

starting the engine.

Protection function

The protection function is activated in the following

situations:

This unit is equipped with a protection function for

protecting this unit and your speakers from various

accidents or problems that can occur.

When the protection function is triggered, the power

indicator goes off and the amplifier stops operating.

· When a speaker wire may be short-circuited.

· When a speaker output contacts ground.

· When the unit malfunctions and a DC signal is sent to the

speaker output.

7 Wiring

· Take the battery wire for this unit directly from the battery.

If it's connected to the vehicle's wiring harness, it can

cause blown fuses etc.

· If a buzzing noise is heard from the speakers when the

engine is running, connect a line noise filter (optional) to

each of the battery wire.

· Do not allow the wire to directly contact the edge of the

iron plate by using Grommets.

· Connect the ground wire to a metal part of the car chassis

that acts as an electrical ground passing electricity to the

battery`s negative

· terminal. Do not turn the power on

if the ground wire is not connected.

· Be sure to install a protective fuse in the power cord

near the battery. The protective fuse should be the same

capacity as the unit's fuse capacity or somewhat larger.

· For the power cord and ground, use a vehicle type

(fireproof) power wring cord. (Use a power wiring cord

with the range of 5 mm² (AWG 10) or more.

· When more than one power amplifier are going to be

used, use a power supply wiring wire and protective

fuse of greater current-handling capacity than the total

maximum current drawn by each amplifier.

7 Speaker Selection

· The rated input power of the speakers that are going

to be connected should be greater than the maximum

output power (in Watts) of the amplifier. Use of speakers

having input power ratings that are less than the output

power of the amplifier will cause smoke to be emitted as

well as damage.

· The impedance of the speakers that are going to

be connected should be 2 or greater (for stereo

connections), or 4 or greater (for bridged connections).

When more than one set of speakers are going to be

used, calculate the combined impedance of the speakers

and then connect suitable speakers to the amplifier

<Example>.

Combined impedance

Lead terminal

Parts included

Parts included /

Cooling fan

KAC-8405_M_EnCh.indd 1

09.10.30 10:58:41 AM

KAC-9405

KAC-9405M

4/3/2 CHANNEL POWER AMPLIFIER

INSTRUCTION MANUAL

4/3/2

5mm2AWG 10

· 12V

ACC ON

· DC

5mm2AWG 10

· 2

Installation /

Connection /

280 mm

240 mm

259 mm

ø 4.6

238

213

Accessories /

ø 4 x 16 mm

Self-tapping screws /

Speaker level input cable /

Hexagon wrench /

Installation board, etc. (thickness : 15 mm or more)

15 mm

M4 × 8 mm

Hexagon socket head cap screw

Dressing cover

Installation procedure

Since there are large variety of settings and

connections possible according to applications,

read the instruction manual well to select the

proper setting and connection.

1. Remove the ignition key and disconnect the

negative

· terminal of the battery to prevent

short circuits.

2. Set the unit according to the intended usage.

3. Remove the Dressing cover.

4. Connect the input and output wires of the

units.

5. Connect the speaker wires.

6. Connect the power wire, power control wire

and grounding wire following this order.

7. Install the installation fittings in the unit.

8. Attach the unit.

9. Attach the Dressing cover.

10. Connect the negative

· terminal of the

battery.

CAUTION

· Do not install in the below locations;

(Unstable location, In a location that interferes

with driving, In a location that gets wet, In a

dusty location, In a place that gets hot, In a place

that gets direct sunlight, In a location that gets

hit by hot air)

· Do not install the unit under the carpet.

Otherwise heat build-up occurs and the unit

may be damaged.

· Install this unit in a location which allows heat to

easily dissipate.

Once installed, do not place any object on top

of the unit.

· The surface temperature of the amplifier will

become hot during use. Install the amplifier in a

place where people, resins, and other substances

that are sensitive to heat will not come into

contact with it.

· This unit has cooling fan to decrease the internal

temperature. Do not mount the unit in a place

where the cooling fan and ducts of the unit are

blocked. Blocking these openings will inhibit the

cooling of the internal temperature and result in

malfunction.

· When making a hole under a seat, inside the

trunk, or somewhere else in the vehicle, check

that there is nothing hazardous on the opposite

side such as a gasoline tank, brake pipe, or wiring

harness, and be careful not to cause scratches or

other damage.

· Do not install near the dashboard, rear tray, or air

bag safety parts.

· The installation to the vehicle should securely

fasten the unit to a place in which it will not

obstruct driving. If the unit comes off due to a

shock and hits a person or safety part, it may

cause injury or an accident.

· After installing the unit, check to make sure that

electrical equipment such as the brake lamps,

turn signal lamps and windshield wipers operate

normally.

10.

WARNING

Remove the ignition key and disconnect the negative

· terminal of the

battery to prevent short circuits.

WARNING

Particular attention must be given to making good electrical

contact at the amplifier-output and speaker terminals.

Poor or loose connections can cause sparking or burning

at the terminals because of the very high power that the

amplifier can deliver.

CAUTION

· If sound is not output normally, immediately turn power off

and check connections.

· Be sure to turn the power off before changing the setting of

any switch.

· If the fuse blows, check wires for shorts, then replace the fuse

with one of the same rating.

· Check that no unconnected wires or connectors are touching

the car body. Do not remove caps from unconnected wires or

connectors to prevent short circuits.

· Connect the speaker wires to appropriate speaker connectors

separately. Sharing the negative wire of the speaker or

grounding speaker wires to the metal body of the car can

cause this unit to fail.

· After installation, check that the brake lamps, turn signal lamps

and windshield wipers work properly.

WARNING

To prevent fire caused by a short in the wiring,

connect a fusible link or breaker nearby the

battery's positive terminal.

7 Power wire and Speaker wire connection

Center unit (CD receiver, etc.)

A.ch Right

A.ch Left

B.ch Right

B.ch Left

Stereo /

Bridged /

A.ch

B.ch

Power control wire

Battery

Ground wire

Battery wire

Protective fuse

Safety precautions

WARNING

To prevent injury or fire, take the following precautions:

· Mounting and wiring this product requires skills and

experience. For safety's sake, leave the mounting and

wiring work to professionals.

· When extending the ignition, battery, or ground wires,

make sure to use automotive-grade wires or other wires

with the range of 5 mm² (AWG 10) or more to prevent

wire deterioration and damage to the wire coating.

· To prevent a short circuit, never put or leave any metallic

objects (such as coins or metal tools) inside the unit.

· If the unit starts to emit smoke or strange smells, turn off

the power immediately and consult your Kenwood dealer.

· Do not touch the unit during use because the surface of

the unit becomes hot and may cause burns if touched.

CAUTION

To prevent damage to the machine, take the following

precautions:

· Be sure the unit is connected to a 12V DC power supply

with a negative ground connection.

· Do not open the top or bottom covers of the unit.

· Do not install the unit in a spot exposed to direct sunlight

or excessive heat or humidity. Also avoid places with too

much dust or the possibility of water splashing.

· When replacing a fuse, only use a new one with the

prescribed rating. Using a fuse with the wrong rating may

cause your unit to malfunction.

· To prevent a short circuit when replacing a fuse, first

disconnect the wiring harness.

NOTE

· If you experience problems during installation, consult

your Kenwood dealer.

· If the unit does not seem to be working right, consult

your Kenwood dealer.

Cleaning the unit

If the front panel gets dirty, turn off the power and wipe the

panel with a dry silicon cloth or soft cloth.

CAUTION

Do not wipe the panel with a hard cloth or a cloth

dampened by volatile solvents such as paint thinner and

alcohol. They can scratch the surface of the panel and/or

cause the indicator letters to peel off.

To prevent battery rise

When the unit is used in the ACC ON position without

turning the engine ON, it depletes the battery. Use it after

starting the engine.

Protection function

The protection function is activated in the following

situations:

This unit is equipped with a protection function for

protecting this unit and your speakers from various

accidents or problems that can occur.

When the protection function is triggered, the power

indicator goes off and the amplifier stops operating.

· When a speaker wire may be short-circuited.

· When a speaker output contacts ground.

· When the unit malfunctions and a DC signal is sent to the

speaker output.

7 Wiring

· Take the battery wire for this unit directly from the battery.

If it's connected to the vehicle's wiring harness, it can

cause blown fuses etc.

· If a buzzing noise is heard from the speakers when the

engine is running, connect a line noise filter (optional) to

each of the battery wire.

· Do not allow the wire to directly contact the edge of the

iron plate by using Grommets.

· Connect the ground wire to a metal part of the car chassis

that acts as an electrical ground passing electricity to the

battery`s negative

· terminal. Do not turn the power on

if the ground wire is not connected.

· Be sure to install a protective fuse in the power cord

near the battery. The protective fuse should be the same

capacity as the unit's fuse capacity or somewhat larger.

· For the power cord and ground, use a vehicle type

(fireproof) power wring cord. (Use a power wiring cord

with the range of 5 mm² (AWG 10) or more.

· When more than one power amplifier are going to be

used, use a power supply wiring wire and protective

fuse of greater current-handling capacity than the total

maximum current drawn by each amplifier.

7 Speaker Selection

· The rated input power of the speakers that are going

to be connected should be greater than the maximum

output power (in Watts) of the amplifier. Use of speakers

having input power ratings that are less than the output

power of the amplifier will cause smoke to be emitted as

well as damage.

· The impedance of the speakers that are going to

be connected should be 2 or greater (for stereo

connections), or 4 or greater (for bridged connections).

When more than one set of speakers are going to be

used, calculate the combined impedance of the speakers

and then connect suitable speakers to the amplifier

<Example>.

Combined impedance

Lead terminal

Parts included

Parts included /

Cooling fan

KAC-8405_M_EnCh.indd 1

09.10.30 10:58:41 AM

Troubleshooting Guide

What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring.

Before calling service, first check the following table for possible problems.

PROBLEM

POSSIBLE CAUSE

SOLUTION

No sound.

(No sound from one

side.)

(Blown fuse.)

· Input (or output) cables are disconnected.

· Protection circuit may be activated.

· Volume is too high.

· The speaker cord is shorted.

· Connect the input (or output) cables.

· Check connections by referring to

<Protection function>.

· Replace the fuse and use lower volume.

· After check the speaker cord and fixing the

cause of the short, replace the fuse.

The output level is too

small (or too large).

· The input sensitivity adjusting control is not

set to the correct position.

· Adjust the control correctly referring to

<Controls>.

The sound quality is

bad.

(The sound is

distorted.)

· The speakers wire are connected with

wrong

ª/·polarity.

· A speaker wire is pinched by a screw in the

car body.

· The switches may be set improperly.

· Connect them properly checking the

ª/·

of the terminals and wires well.

· Connect the speaker wire again so that it is

not pinched by anything.

· Set switches properly by referring to

<System examples>.

· <>

· · <>

ª/·

· <>

System examples /

Right speaker (Bridged)

Left speaker (Bridged)

Connection /

Controls /

7 RCA cable or Speaker level input connection

7 RCA

Center unit (CD receiver, etc.)

Power control wire

Parts included

RCA cable

RCA

RCA cable connections / RCA

Speaker level input connections /

Cable color of the connector /

A channel Left / A

9 White /

· White-Black / -

A channel Right / A

9 Gray /

· Gray-Black / -

B channel Left / B

9 Green /

· Green-Black / -

B channel Right / B

9 Purple /

· Purple-Black / -

Genuine-accessory car stereo

(No line output center unit etc.)

4-channel system

Front left speaker

Front right speaker

Rear left speaker

Rear right speaker

Center unit

2-channel + Subwoofer system

2 +

Left speaker (high pass)

High-power 2-channel system

Center unit

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE)

SJ/T11363-2006

× SJ/T11363-2006

NOTE

Do not connect cables and leads to both RCA cable

input jacks and the speaker level input terminals

simultaneously, for this may cause malfunction or

damage.

RCA

Right speaker (high pass)

Subwoofer (Bridged)

................................... 720 W (180 W × 4)

(+B = 14.4V)

(4 ) (20 Hz -- 20 kHz,

0.08 % THD)

.................................................... 60 W × 4

(2 ) (1 kHz,

0.8 % THD) ................. 90 W × 4

(4 ) (1 kHz,

0.8 % THD) ............... 180 W × 2

............................................. 2 k -- 8 k

4 k -- 8 k ()

(+0, -- 3 dB).................................5 Hz -- 50 kHz

()

...........................................0.2 V

............................................5.0 V

.................................................................. 95 dB

.................................................................10 k

(-12 dB/oct.) ...50 Hz -- 200 Hz ()

40 HzB ..................... 0 / +18 dB

.................................... 14.4 V (11 -- 16 V)

...................................................................34 A

××..................280 × 59 × 238 mm

................................................................. 2.8 kg

Specifications

Specifications subject to change without notice.

Audio Section

Max Power Output ..........................................720 W (180 W × 4)

Rated Power Output (+B = 14.4V)

Normal (4 ) (20 Hz 20 kHz, 0.08 % THD)...60 W × 4

(2 ) (1 kHz, 0.8 % THD)...........................90 W × 4

Bridged(4 ) (1 kHz, 0.8 % THD)........................180 W × 2

Speaker impedance.............................................................2 8

4 8 (Bridged)

Frequency Response (+0, 3 dB).......................5 Hz 50 kHz

Sensitivity (rated output) MAX. ............................................ 0.2 V

MIN. ............................................. 5.0 V

Signal to Noise Ratio....................................................................95 dB

Input Impedance...........................................................................10 k

Low Pass Filter Frequency (-12 dB/oct.)

.....................................................50 Hz 200 Hz (variable)

High Pass Filter Frequency (-12 dB/oct.)

.....................................................50 Hz 200 Hz (variable)

Bass Boost Control (40 Hz / B channel)................. 0 / +18 dB

General

Operating Voltage........................ 14.4 V (11 16 V allowable)

Current Consumption ..................................................................34 A

Dimensions (W × H × D)...........................280 × 59 × 238 mm

11 × 2-5/16 × 9-3/8 inch

Weight .........................................................................2.8 kg (6.1 lbs)

This is a 4 channel amplifier including

2 stereo amplifiers in a body. One

amplifier is referred to as amplifier A

and the other is amplifier B. This unit

is compatible with a large variety of

systems by combining the switches

and functions described in the

following.

Fuse (30 A x 2)

NOTE

If you can't find the specified capacity

fuse at your store etc., consult your

Kenwood dealer.

Battery terminal (BATT.)

Ground terminal (GND)

Power control terminal (P.CON)

Controls the unit ON/OFF.

NOTE

Controls the unit power. Be sure to

connect it with all the systems.

Speaker output terminals

(A.ch/B.ch)

· Stereo Connections:

When you wish to use the unit as a

stereo amplifier, stereo connections are

used. The speakers to be connected

should have an impedance of 2 or

greater. When multiple speakers are to

be connected, ensure that the combined

impedance is 2 or greater for each

channel.

· Bridged Connections:

When you wish to use the unit as

a high-output monaural amplifier,

bridged connections are used. (Make

connections to the LEFT channel

9 and

the RIGHT channel

· SPEAKER OUTPUT

terminals.)

The speakers to be connected should

have an impedance of 4 or greater.

When multiple speakers are to be

connected, ensure that the combined

impedance is 4 or greater.

FILTER switch (A.ch/B.ch)

This switch allows to apply high-pass

or low-pass filtering to the speaker

outputs.

· HPF (High-Pass Filter) position:

The filter outputs the band of higher

frequencies than the frequency set with

the "HPF FREQUENCY" control.

· OFF position:

The entire bandwidth is output without

filtering.

· LPF (Low-Pass Filter) position:

The filter outputs the band of lower

frequencies than the frequency set with

the "LPF FREQUENCY" control.

Operation switch (A.ch/B.ch)

The amplification methods of the

signals input can be selected.

· STEREO position:

The amplifier can be used as a stereo

amplifier.

· MONO (Lch) position:

Amplifies the signal input from the left

side only. Set to this position and make

bridged connections to use as a high-

power monaural amplifier. (The input

right signal is not output.)

LPF/HPF FREQUENCY control

(A.ch/B.ch)

Sets the cutoff frequency when the

"FILTER" switch is set to "HPF" or "LPF".

INPUT SENSITIVITY control

(A.ch/B.ch)

Set this control according to the

pre-output level of the center unit

connected with this unit.

The sensitivities of amplifiers A and B

can be adjusted independently.

NOTE

For the pre-output level, refer to the

<Specifications> in the instruction

manual of the center unit.

BASS BOOST switch (B.ch)

Setting this switch to "ON" emphasizes

the bass. You can use the BASS BOOST

for amplifier B only.

· ON position:

BASS BOOST is +18 dB.

· OFF position:

BASS BOOST is off.

LINE IN terminal (A.ch/B.ch)

SP LEVEL INPUT terminal

The genuine-accessory car stereo shall

have a maximum power output of no

more than 40 W.

The power is turned on and off as

the unit detects input signal (SIGNAL

SENSING TURN-ON). Therefore it is not

necessary to connect the power control

wire.

Power indicator

When the power is turned on, the

Power indicator lights.

(30 A x 2)

BATT. ()

GND ()

P.CON

SPEAKER OUTPUT ()

(A.ch/B.ch)

· :

LEFT

9 RIGHT ·

SPEAKER OUTPUT

FILTER (A.ch/B.ch)

· HPF:

"HPF FREQUENCY"

· OFF:

· LPF:

LPF FREQUENCY

(A.ch/B.ch)

· STEREO:

· MONOLch-

HPF/LPF FREQUENCY

(A.ch/B.ch)

"FILTER" "HPF" "LPF"

INPUT SENSITIVITY

(A.ch/B.ch)

A B

BASS BOOST (B.ch)

"ON"

· ON:

+18dB

· OFF:

LINE IN (A.ch/B.ch)

SIGNAL SENSING

TURN-ON

For Turkey

Bu ürün 26891sayili Resmi Gazete'de yayimlanan Elektrikli ve Elektronik Eyalarda Bazi Zararli Maddelerin

Kullaniminin Sinirlandirilmasina Dair Yönetmelie uygun olarak üretilmitir.

This product complies with Directive, Number 26891 regarding "REGULATION ON THE RESTRICTION OF THE

USE OF CERTAIN HAZARDOUS SUBSTANCES IN ELECTRICAL AND ELECTRONIC EQUIPMENT".

A.ch B.ch

KAC-8405_M_EnCh.indd 2

09.10.30 10:58:52 AM

Reviews

There are no reviews of this manual yet.

Related Products

KENWOOD KFCW3080 Service Manual

This manual has 1 pages, file size: 0.04 MB. It's available in languages: English.

KENWOOD KDT99R Service Manual

This manual has 96 pages, file size: 14.26 MB. It's available in languages: English.

KENWOOD KRFVR406 Service Manual

This manual has 37 pages, file size: 5.01 MB. It's available in languages: English.

KENWOOD DPFR6010 Service Manual

This manual has 18 pages, file size: 2.32 MB. It's available in languages: English.

KENWOOD MIDI M959 Service Manual

This manual has 77 pages, file size: 30.89 MB. It's available in languages: English.

KENWOOD KAC-9405 Owner's Manual

Manual details

We guarantee that...

Sample pages

Reviews

Related Products

KENWOOD KFCW3080 Service Manual

KENWOOD KDT99R Service Manual

KENWOOD KRFVR406 Service Manual

KENWOOD DPFR6010 Service Manual

KENWOOD MIDI M959 Service Manual

Popular Brands

General

Members Area