English
|
3
Before use
2WARNING
To prevent injury or fire, take the following
precautions:
· To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
· Mounting and wiring this product requires skills and
experience. For safety's sake, leave the mounting
and wiring work to professionals.
2CAUTION
To prevent damage to the machine, take
the following precautions:
· Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of
water splashing.
Notes
· If you experience problems during installation,
consult your Kenwood dealer.
· The capital letters and small letters of the display
can be reversed.
· The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
Kenwood Receivers available for this unit
Operation methods are classified into groups by
receiver (control unit) type.
First, refer to the model list in <Appendix> (page 22)
to confirm the group of the operation you whish to
perform.
Model-A, Model-B, Model-C, or Model-D
Refer to the relevant pages (<Basic Operation of
hands-free phoning>). To use a Bluetooth audio player
with this unit, refer to <Bluetooth Audio> (page 17).
Model-E
Refer to the relevant pages (<Operation of hands-free
phoning>). To use a Bluetooth audio player with this
unit, refer to <Bluetooth Audio> (page 17).
Model-F
After performing the operation mentioned on page
12, refer to the Instruction Manual for Control Unit. To
use a Bluetooth audio player with this unit, refer to
<Bluetooth Audio> (page 17).
Notes on selecting and deleting a Hands-Free
Phone
· If a cell-phone is already selected, deselect it, and then
select a different one.
· "BT200 FW***" and the firmware version are displayed in the
cell-phone selection list. Although the same contents are
displayed in the deletion list, they cannot be deleted.
· The audio player is displayed on the device list after the
registration. However, the audio player on the list cannot be
selected.
Model-G
Refer to the Instruction Manual for Control Unit.
About the Cell-Phone
This unit conforms to the following Bluetooth
specifications:
Version
Bluetooth Standard Ver. 1.2
Profile
HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phonebook Access Profile)
SYNC (Synchronization Profile)
For the cell-phones verified for compatibility, access
the following URL:
http://www.kenwood.com/bt/information/
/
· The units supporting the Bluetooth function have been
certified for conformity with the Bluetooth Standard
following the procedure prescribed by Bluetooth
SIG. However, it may be impossible for such units to
communicate with your cell-phone depending on its type.
· HFP is a profile used to make a hands-free call.
· OPP is a profile used to transfer data such as a phone book
between units.
About the Bluetooth Audio player
This unit conforms to the following Bluetooth
specifications:
Version
Bluetooth Standard Ver. 1.2
Profile
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
/
· A2DP is a profile designed to transfer the music from an
audio player.
· AVRCP is a profile designed to control playback and
selection of music by an Audio player.
