7 | KDC-BT92SD
English
|
8
Component names and functions
1 Release button
To drop the faceplate down to open and CD can be
inserted or ejected (press the button).
2 [MENU] button
To select a song or set functions. See <Menu List
Operation>(page8).
3 [DISP] button
To change display item (press the button).
To scroll through texts on the display. (press the
buttonatleast1second).
4 [VOL] knob
To adjust volume (turn the knob).
To select menu list item (turn and press the knob). See
<MenuListOperation>(page8) for details.
To make a voice dialing call (press the button at least
1second).
5 [PRESET] button
To enter Station Preset Memory mode (press the
button).
To enter Search mode (iPod), move between folders
(Audiofile),etc.(pressthebuttonatleast1second).
For more details, see operations of each source
describedinpage8orlater(pressthebuttonatleast
1second).
6 Microphon
The microphone for the hands free phone is supplied.
When your voice cannot be recognized due to the
low microphone volume or noises in the vehicle,
adjust the microphone settings by <Bluetooth
Setting> (page 53).
7 Auxiliary Input Terminal
Portable audio device can be connected with the
mini-plug (3.5 mm ø).
· Usethemini-plugcablewhichisstereotypeanddoesnot
have any resistance.
8 [SRC] button
To turn on this unit and select the Source (press the
button).
Toturnoffthisunit(pressthebuttonatleast1
second).
9 [
4] / [¢] buttons
To select station, song and setting items. (press the
button).
10 [
38] button
To start or interrupt playback for CD, audio file, and
iPod. (press the button).
11 [iPod] button
To select iPod source (press the button).
To set "APP & iPod Mode" to ON/OFF (press the
buttonatleast1second).
12 Display window
13 [
] button
To enter Bluetooth mode (press the button).
To enter Bluetooth easy pairing mode (press the
buttonatleast1second).See<Easy pairing function>
(page 25).
14 USB Terminal
A USB device or an iPod can be connected.
AUX
2
3
4
5
6
7
8
9
10
11
12
13
14
1
Before Using
Exit of the Demonstration Mode
Turn off the demonstration mode when you use it
for the first time after installation.
1 Press the [VOL] knob to quit the demonstration
mode when the messages "To cancel Demo
press the volume knob" are displayed (approx. 15
seconds).
2 Turn the [VOL] knob to select"YES"and press the
[VOL] knob.
/
· Demonstrationmodecanalsobecancelledin"DEMO
Mode" of Menu List mode. Refer to <Demonstration mode
Setting> (page 42).
Common Operation
Power and source select
Turns the power ON by pressing the [SRC]
button.
When the power is ON, select a source.
· SRC Select mode 1: Pressing the [SRC] button
each time switches between sources.
Tuner ("TUNER") Bluetooth Audio ("BT
AUDIO") USB ("USB") or iPod ("iPod") SD
("SD") CD ("CD") Auxiliary input ("AUX")
Standby ("STANDBY") Tuner...
· SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
Keeping pressing the [SRC] button for at least 1
second turns the power OFF.
/
· TheSRCSelectmodecanbesetin"SRCSelect"of<Initial
Settings>(page41).
· Auxiliaryinputsourceisinitiallysetto"OFF".Set"Builtin
AUX" described in <InitialSettings>(page41) to "ON".
· Whenanoptionalaccessoryisconnected,thesourcename
for each device appears.
· WhenconnectionoftheiPodisrecognized,thesource
display changes from "USB" to "iPod".
· ThisunitautomaticallyturnsfullpowerOFFafter20
minutes lapses in Standby mode in order to save the
vehicle's battery. The time until full power OFF can be set in
"Power OFF Wait" of <InitialSettings>(page41).
Volume
Turning the [VOL] knob adjusts the sound
volume.
Menu List Operation
The basic operating procedure for using this
function is described below. The individual function
items are covered in the operating procedures.
1 Select the source
Pressing the [SRC] button repeatedly switches
source.
Function items vary from source to source. For a list
of the function items. Refer to <Menu List> (page
67).
SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
2 Enter Menu List mode
Press the [MENU] button.
3 Select the setting item
Turn the [VOL] knob and press it when the
desired item is displayed.
Repeat the operation until your desired setup item
is selected.
Press the [MENU] button to return to the
previous item.
Operation example:
Music
PlayLists
My
...
Artists
Albums
...
Play Mode
...
[VOL]
[MENU]
[VOL]
[MENU]
1
1
2
2
3
4
3
1
4
2
3
1 sec.
In this manual, the above selection is indicated as
Select "Music"
> "Playlists" > "My Best 25".
4 Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
5 Exit Menu List mode
Press the [MENU] button for at least 1 second to
return to the first hierarchy. Press the [MENU]
button in the first hierarchy to exit the Menu
List mode.
/
·
You cannot set the item with the " " icon displayed.
General operation
Rear view
