KENWOOD KDC-PS9590R Owner's Manual

Cover page of KENWOOD KDC-PS9590R Owner's Manual

Owner's Manual for KENWOOD KDC-PS9590R, downloadable as a PDF file.

We also have service manual to this model.

Manual details

  • Immediate download after payment.
  • Delivered as a PDF file.
  • The manual has 56 pages
  • File size: 0.66 MB
  • Available language versions: English
  • Different language versions may vary sligthly in file size and page count.

We guarantee that...

  • our manuals are complete,
  • our manuals are checked with antivirus,
  • We'll issue refund if the manual is damaged, incomplete or unreadable (our refund policy)

Sample pages

Thumbnail of page 1Thumbnail of page 2Thumbnail of page 3Thumbnail of page 4
Thumbnail of page 5Thumbnail of page 6Thumbnail of page 7Thumbnail of page 8
Thumbnail of page 9
background image
KDC-PS9590R
KDC-9090R
KDC-8090R
B64-1900-00 (EN)
COMPACT
DIGITAL AUDIO
CD-RECEIVER
INSTRUCTION MANUAL
background image
KDC-PS9590R
KDC-9090R
KDC-8090R
B64-1900-00 (EN)
COMPACT
DIGITAL AUDIO
CD-RECEIVER
INSTRUCTION MANUAL
background image
-- 2 --
English
Contents
Safety precautions ...................3
Handling Compact discs...........6
General features
Power .....................................................8
Volume....................................................9
Switching Modes....................................9
Attenuator...............................................9
Loudness ..............................................10
Faceplate Angle Adjustment ................10
Switching Full-Screen Display ..............10
Switching the Upper Part Display.........10
Switching the Lower Part Display ........12
System Q..............................................13
Speaker & Woofer setting ....................13
Forced Closing ......................................14
Removing the Faceplate.......................14
TEL Mute ..............................................15
Non-Fading Output ...............................15
Audio control features
Audio Control Setting ...........................16
Bass Centre Frequency ........................17
Bass Level ............................................17
Bass Quality Factor...............................17
Bass Extend..........................................17
Middle Centre Frequency .....................17
Middle Level .........................................17
Middle Quality Factor ...........................17
Treble Centre Frequency ......................17
Treble Level ..........................................17
Balance Level........................................18
Fader Level ...........................................18
Non-Fading Level ..................................18
High-pass Filter Frequency
for Front Output................................18
High-pass Filter Frequency
for Rear Output.................................18
Low-pass Filter Frequency
for Non-Fading Output ......................18
Phase for Non-Fading Output ...............19
Volume Offset ......................................19
Tuner features
Tuning ...................................................20
Direct Access Tuning ...........................20
Station Preset Memory ........................21
Preset station seek with Programme
service name ....................................21
RDS features
RDS (Radio Data System).....................22
Enhanced Other Network.....................22
Alarm ....................................................23
Traffic Information Function .................23
Presetting Volume for Traffic
Information/News .............................23
Programme Type (PTY) Function..........24
Changing Language for Programme
Type(PTY) Function...............................25
Radio Text Scroll...................................25
CD/External disc control features
Playing CDs...........................................26
Playing Other Disc mode......................27
Fast Forwarding and Reversing
Disc Play ...........................................27
Track Search .........................................27
Disc Search...........................................28
Track / Disc Repeat...............................28
Track Scan ............................................28
Random Play.........................................28
Magazine Random Play ........................29
Text Scroll .............................................29
Presetting Disc Names (DNPS) ............30
Direct Track Search ..............................31
Direct Disc Search ................................31
Disc Name Preset Play (DNPP) ...........32
Menu settings
Menu System .......................................33
Mask Key ..............................................34
Touch Sensor Tone...............................35
Manual Time Adjustment .....................35
Calendar Adjustment ............................36
Calendar Mode .....................................36
Memo Mode.........................................36
Automatic Time Adjustment.................37
Selectable Illumination..........................37
Switching Display Mode.......................37
Icon/Spectrum analyzer Select .............38
Font Select............................................38
Brightness level adjustment .................38
Dimmer.................................................38
Time setting for removing
the faceplate .....................................38
System Q..............................................38
Built-in Amp Mute Control....................39
Switching preout...................................39
Dual Zone System ................................39
External Amp Control ...........................39
News Bulletin Function
with PTY News Timeout Setting ......40
Local Seek Function ............................40
Selecting Tuning Mode.........................40
Auto Memory Entry ..............................40
AF (Alternative Frequency) Function ....41
Restricting RDS Region
(Region Restrict Function) ................41
Auto TP Seek Function .........................41
Monaural Reception ............................41
Text Scroll .............................................42
Power OFF Timer .................................42
Basic Operations of remote
control ....................................42
Installtion
Accessories ..........................................45
Installation Procedure ...........................45
Connecting Cables to Terminals...........46
Installtion ..............................................47
Removing the Unit................................48
Locking the faceplate to the unit..........49
Troubleshooting Guide ...........50
Specifications.........................54
background image
-- 3 --
To prevent injury and/or fire, take the
following precautions:
· Insert the unit all the way until it is fully
locked in place. Otherwise it may fly out of
place during collisions and other jolts.
· When extending the ignition, battery or
ground cables, make sure to use
automotive-grade cables or other cables
with an area of 0.75mm2 (AWG18) or more
to prevent cable deterioration and damage
to the cable coating.
· To prevent short circuits, never put or leave
any metallic objects (e.g., coins or metal
tools) inside the unit.
· If the unit starts to emit smoke or strange
smells, turn off the power immediately and
consult your Kenwood dealer.
· Make sure not to get your fingers caught
between the faceplate and the unit.
· Be careful not to drop the unit or subject it
to strong shock.
The unit may break or crack because it
contains glass parts.
2WARNING
To prevent damage to the machine,
take the following precautions:
· Make sure to ground the unit to a negative
12V DC power supply.
· Do not open the top or bottom covers of the
unit.
· Do not install the unit in a spot exposed to
direct sunlight or excessive heat or
humidity. Also avoid places with too much
dust or the possibility of water splashing.
· Do not subject the faceplate to excessive
shock, as it is a piece of precision
equipment.
· When replacing a fuse, only use a new one
with the prescribed rating. Using a fuse with
the wrong rating may cause your unit to
malfunction.
· To prevent short circuits when replacing a
fuse, first disconnect the wiring harness.
· Do not place any object between the
faceplate and the unit.
· During installation, do not use any screws
except for the ones provided. The use of
improper screws might result in damage to
the main unit.
· Do not apply excessive force to the moving
faceplate. Doing so will cause damage or
malfunction.
· Do not apply excessive force to the open
faceplate or place objects on it. Doing so
will cause damage or breakdown.
2CAUTION
IMPORTANT INFORMATION
About the disc changer to be
connected:
To connect a disc changer having the "O-N"
switch to this unit, set the "O-N" switch to
"N".
When you connect a model with no "O-N"
switch, the converter cord CA-DS100
available as an option may be required. For
details, consult your Kenwood dealer.
If a model with no "O-N" switch is
connected, some unavailable functions and
information that cannot be displayed are
generated, such as the DNPS, DNPP,
Magazine random play, and CD Text display.
Note that none of the KDC-C100, KDC-C302,
C205, C705, and non-Kenwood CD changers
can be connected.
You can damage both your unit and
the CD changer if you connect them
incorrectly.
Do Not Load 8-cm (3-in.) CDs in the
CD slot
If you try to load an 8-cm CD with its adapter
into the unit, the adapter might separate
from the CD and damage the unit.
2CAUTION
Safety precautions
background image
-- 4 --
English
· If you experience problems during
installation, consult your Kenwood dealer.
· If the unit fails to operate properly, press the
RESET button. The unit returns to factory
settings when the RESET button is pressed.
After you press the reset button, the Mask
Key will be needed to restart the unit. If the
unit still fails to operate properly after the
RESET button has been pressed, contact
your local KENWOOD dealer for assistance.
· Press the reset button if the CD auto
changer is first controlled and operates
incorrectly. The original operating condition
will return.
NOTE
· The illustrations of the display and the panel
appearing in this manual are examples used
to explain more clearly how the controls are
used. Therefore, what appears on the
display in the illustrations may differ from
what appears on the display on the actual
equipment, and some of the illustrations on
the display may represent something
impossible in actual operation.
· The functions that can be used and the
information that can be displayed will differ
depending on the external disc players
being connected.
Safety precautions
Mask key
If you have transmitted the Mask Key's
signal once to the unit in advance, you will
have to transmit it once again if the unit has
been removed from the battery. This
function helps prevent theft.
When using the unit for the first time:
In order to deactivate the demonstration
mode, be sure to press the transmit button
to transmit the Mask Key's signal.
If this procedure is not carried out, the
control panel of the unit will re-open in two
seconds even with your vehicle's ignition
turned off.
Do not loose the "Mask Key".
If power is disconnected from the unit,
correct operation can only be restored by the
"Mask Key's" signal.
The "Mask Key" will also be required for
service repair.
If you send products in for repair that include
a mask key, make sure to present the unit
together with the mask key.
NOTE
2CAUTION
OFF
NF
DAB
AUD
VOL ADJ
U
Reset button
background image
-- 5 --
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get
dirty, wipe them with a dry, soft cloth.
Cleaning the Unit
If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the
stain off with a cloth moistened with neutral
cleaner, then wipe neutral detergent off.
Applying spray cleaner directly to the unit
may affect its mechanical parts. Wiping the
faceplate with a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch
the surface or erases characters.
2CAUTION
Cleaning the CD Slot
As dust can accumulate in the CD slot, clean
it occasionally. Your CDs can get scratched if
you put them in a dusty CD slot.
The marking of products using lasers
(Except for some areas)
The label is attached to the chassis/case and
says that the component uses laser beams
that have been classified as Class 1. It
means that the unit is utilizing laser beams
that are of a weaker class. There is no
danger of hazardous radiation outside the
unit.
CLASS 1
LASER PRODUCT
Lens Fogging
Right after you turn on the car heater in cold
weather, dew or condensation may form on
the lens in the CD player of the unit. Called
lens fogging, CDs may be impossible to play.
In such a situation, remove the disc and wait
for the condensation to evaporate. If the unit
still does not operate normally after a whilst,
consult your Kenwood dealer.

Reviews

There are no reviews of this manual yet.

Related Products

Cover page of KENWOOD KR-V999D Service Manual

This manual has 55 pages, file size: 25 MB. It's available in languages: English.

Cover page of KENWOOD TK-5400 Service Manual

This manual has 56 pages, file size: 2.06 MB. It's available in languages: English.

Cover page of KENWOOD KRC157D Service Manual

This manual has 30 pages, file size: 34.89 MB. It's available in languages: English.

Cover page of KENWOOD DPC371 Service Manual

This manual has 9 pages, file size: 2.53 MB. It's available in languages: English.

Cover page of KENWOOD RFU-6100 Owner's Manual

This manual has 8 pages, file size: 0.22 MB. It's available in languages: French, English.