PowerPad
(A70-1191-05) : RC-R0907
Battery cover(A09-1115-08)
Remote
ENTER
VOLUME
CONFIRM
MUTE
ON/STANDBY
Batteries
AM Loop Antenna (T90-0833-05)
AC
(E03-0115-05)
plug adapter
FM
(T90-0841-05)
Antenna
Use to adapt the plug onthe
power cord to the shape of the
wall outlet.
(Present only for regions where
use is necessary.)
AM Antenna Base
KRF-V7772D/VR-3080
2
CONTENTS / ACCESSORIES
CONTENTS/ACCESSORIES/CAUTIONS ...................2
CONTROLS .................................................................3
DISASSEMBLY FOR REPAIR .....................................4
BLOCK DIAGRAM .......................................................5
CIRCUIT DESCRIPTION .............................................6
ADJUSTMENT ...........................................................12
WIRING DIAGRAM ....................................................13
PC BOARD ................................................................14
SCHEMATIC DIAGRAM ............................................19
EXPLODED VIEW .....................................................36
PARTS LIST...............................................................37
SPECIFICATIONS .....................................................49
Contents
Accessories
RESET
Resetting
Receiver
PowerPad
If you want to reconfigure PowerPad, you can reset
it. You do not need to do this unless you experience
a problem.
1. Open the cover and remove the batteries,
2. Use a pen or other thin-tipped object to press
the blue button in the center of the battery case:
OPEN
3. Reinstall the batteries and follow the instruc-
tions in this chapter to set up PowerPad again.
If none of the above solutions work, reset the micro-
processor:
(For USA and Canada)
1. Turn the receiver off.
2. Unplug the receiver.
3. Plug it back in while pressing and holding the
Power button (you may need someone else to
help you do this)
4. Continue to hold the Power button for more than
1 second.
(For Other Countries)
1. Turn the receiver off. (The Power button is OFF
position.)
2. Press ON/STANDBY button while pressing and
holding the Power button.
3. Continue to hold the Power button for more than
1 second.
KRF-V7772D(K) COVER1,1( 99.10.29 10:11 AM y[W 3