RD-HML700
2
ACCESSORIES / CAUTIONS
Card-type remote control unit
(1, with built-in button battery)
(A70-1643-05)
FM indoor antenna (1)
(T90-0877-05)
AM loop antenna
(T90-0906-05)
AC adapter (1)
(W09-1299-15)
Power cord (1)
(E30-7305-05)
Accessories
Operation to reset
The microcomputer may fall into malfunction (impossi-
bility to operate, erroneous display, etc.) when the
power cord is unplugged while unit is ON or due to an
external factor. In this case, execute the following pro-
cedure to reset the microcomputer and return it to nor-
mal condition.
Unplug the power cord from the power outlet, then
while holding the
key depressed, plug the power
cord again.
Please note that resetting the microcomputer
clears the contents stored in and it returns to condi-
tion when it left the factory.
After resetting the microcomputer, the display will show
as follow:
The marking of products using lasers
The marking of this product has been classified as Class 1. It means
that there is no danger of hazardous radiation outside the product.
Location: Back panel
CLASS 1
LASER PRODUCT
1 Remove the CD from the unit.
2 Press the CD
key.
3 Wait for some time and verify that the dis-
play appears as above.
4 Wait a few seconds and turn the unit OFF.
Note related to transportation and movement
Before transporting or moving this unit, carry out the
following operations.
Memory backup function
The following information is backed up for about
1 day after the power cord is unplugged from the
wall AC outlet.
Input source
Volume setting
AUX input level setting
TONE setting
TIMER setup
Display contrast and backlight setting
Main unit CD key indicator setting
Auto power save feature setting
Tuner related
Preset radio stations
Tuning mode setting (Auto or manual)
Cautions
System Configration
SYSTEM
RECEIVER
SPEAKER
HM-L700
RD-HML700
LS-LCA7
