B
B
A
C
MECHANICAL INSTRUCTIONS - TS9201
1. Put Toppart (*item1) and IR-wind assy (*item 4) together.
2. Place Toppart assy (item1 & item4) upside down.
3. Place upper keymat assy. (*item8)
4. Place LCD keymat assy. (*item9)
Set Reassembly
1a. Put printboard on LCD assy. (*item15)
2a. Soldering the 2 fixation points. see arrow B
3a. Connect the flex cable. see arrow A
4a. Solder the two wires. see arrow C
8. Place bottonpart assy (*item2)
9. Mount the two screws. see arrow
10. Place battery pack. (*item34)
11. Place batterylid assy. (*item3)
1-3
5. Place mainboard in the toppart.assy.
6. Place Doc. plug assy. (*item7)
7. Mount the 5 screws back. see arrows
Reassembly LCD & Mainboard
12. Place plug insert assy. (*item6)
see picture - arrow
4
1
8
9
6
* for items see overview disassembled parts
7