B
MECHANICAL INSTRUCTIONS - TS9500
1. Put Toppart (*item1) and IR-wind assy (*item 4) together.
2. Place Toppart assy (item1 & item4) upside down.
3. Place LCD assy. (*item15)
4. Place action keys assy . (*item8)
5. Place lower keymat assy. (*item 9)
Set Reassembly
6. Place LCD support plate (*item17)
1-3
1
9
7
15
1 + 4
9
7. Place printboard assy. (*item1001)
8. Place Doc. plug assy. (*item7)
9 Connect the two flex cable to the connectors
and close the cable locks. see arrows A
10. Mount the 5 screws back. see arrows
11. Place the bottom part (*item 2)
12. Mount the 2 screws
13. Place batterypack
14. Place batterylid assy. (*item3)
A
7
8
17
* for items see overview disassembled parts