ONKYO DRC500 Owner's Manual

ONKYO DRC500 Owner's Manual
0 Rating(s)
Read reviews

Owner's Manual for ONKYO DRC500, downloadable as a PDF file.

We also have service manual to this model.

Manual details

Immediate download after payment.
Delivered as a PDF file.
The manual has 68 pages
File size: 2.88 MB
Available language versions: English
Different language versions may vary sligthly in file size and page count.

We guarantee that...

our manuals are complete,
our manuals are checked with antivirus,
We'll issue refund if the manual is damaged, incomplete or unreadable (our refund policy)

Sample pages

DVD Changer Receiver

DR-C500

Instruction Manual

Thank you for purchasing the Onkyo DVD Changer Receiver.

Please read this manual thoroughly before making

connections and plugging in the unit.

Following the instructions in this manual will enable you to

obtain optimum performance and listening enjoyment from

your new DVD Changer Receiver.

Please retain this manual for future reference.

Contents

Getting Started

Setup

Before Using Your DVD Changer Receiver

Other

Advanced Operation

Basic Operation

DVD Changer Receiver

DR-C500

Instruction Manual

Thank you for purchasing the Onkyo DVD Changer Receiver.

Please read this manual thoroughly before making

connections and plugging in the unit.

Following the instructions in this manual will enable you to

obtain optimum performance and listening enjoyment from

your new DVD Changer Receiver.

Please retain this manual for future reference.

Contents

Getting Started

Setup

Before Using Your DVD Changer Receiver

Other

Advanced Operation

Basic Operation

Important Safeguards

1. Read Instructions All the safety and operating

instructions should be read before the appliance is

operated.

2. Retain Instructions The safety and operating

instructions should be retained for future reference.

3. Heed Warnings All warnings on the appliance and in

the operating instructions should be adhered to.

4. Follow Instructions All operating and use instructions

should be followed.

5. Cleaning Unplug the appliance from the wall outlet

before cleaning. The appliance should be cleaned only

as recommended by the manufacturer.

6. Attachments Do not use attachments not

recommended by the appliance manufacturer as they

may cause hazards.

7. Water and Moisture Do not use the appliance near

water for example, near a bath tub, wash bowl, kitchen

sink, or laundry tub; in a wet basement; or near a

swimming pool; and the like.

8. Accessories Do not place the appliance on an

unstable cart, stand, tripod, bracket, or table. The

appliance may fall, causing serious injury to a child or

adult, and serious damage to the appliance. Use only

with a cart, stand, tripod, bracket, or table recommended

by the manufacturer, or sold with the appliance. Any

mounting of the appliance should follow the

manufacturer's instructions, and

should use a mounting accessory

recommended by the manufacturer.

9. An appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the appliance

and cart combination to overturn.

10. Ventilation Slots and openings in the cabinet are

provided for ventilation and to ensure reliable operation

of the appliance and to protect it from overheating, and

these openings must not be blocked or covered. The

openings should never be blocked by placing the

appliance on a bed, sofa, rug, or other similar surface.

The appliance should not be placed in a built-in

installation such as a bookcase or rack unless proper

ventilation is provided. There should be free space of at

least 20 cm (8 in.) and an opening behind the appliance.

11. Power Sources The appliance should be operated

only from the type of power source indicated on the

marking label. If you are not sure of the type of power

supply to your home, consult your appliance dealer or

local power company.

12. Grounding or Polarization The appliance may be

equipped with a polarized alternating current line plug (a

plug having one blade wider than the other). This plug

will fit into the power outlet only one way. This is a safety

feature. If you are unable to insert the plug fully into the

outlet, try reversing the plug. If the plug should still fail to

fit, contact your electrician to replace your outlet. Do not

defeat the safety purpose of the polarized plug.

13. Power-Cord Protection Power-supply cords should be

routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular

attention to cords at plugs, convenience receptacles, and

the point where they exit from the appliance.

14. Outdoor Antenna Grounding If an outside antenna or cable

system is connected to the appliance, be sure the antenna or

cable system is grounded so as to provide some protection

against voltage surges and built-up static charges. Article 810

of the National Electrical Code, ANSI/NFPA 70, provides

information with regard to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to an

antenna-discharge unit, size of grounding conductors, location

of antenna-discharge unit, connection to grounding electrodes,

and requirements for the grounding electrode. See FIGURE

15. Lightning For added protection for the appliance during a

lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the appliance due to lightning and power-line

surges.

16. Power Lines An outside antenna system should not be

located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power

lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such

power lines or circuits as contact with them might be fatal.

17. Overloading Do not overload wall outlets, extension

cords, or integral convenience receptacles as this can result

in a risk of fire or electric shock.

18. Object and Liquid Entry Never push objects of any kind

into the appliance through openings as they may touch

dangerous voltage points or short-out parts that could result

in a fire or electric shock. Never spill liquid of any kind on

the appliance.

19. Servicing Do not attempt to service the appliance

yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

20. Damage Requiring Service Unplug the appliance form

the wall outlet and refer servicing to qualified service

personnel under the following conditions:

A. When the power-supply cord or plug is damaged,

B. If liquid has been spilled, or objects have fallen into the

appliance,

C. If the appliance has been exposed to rain or water,

D. If the appliance does not operate normally by following

the operating instructions. Adjust only those controls that

are covered by the operating instructions as an improper

adjustment of other controls may result in damage and

will often require extensive work by a qualified technician

to restore the appliance to its normal operation,

E. If the appliance has been dropped or damaged in any

way, and

F. When the appliance exhibits a distinct change in

performance this indicates a need for service.

S3125A

PORTABLE CART WARNING

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS

OUVRIR

AVIS

Precautions

Note to CATV system installer:

This reminder is provided to call the CATV system installer's

attention to Section 820-40 of the NEC which provides

guidelines for proper grounding and, in particular, specifies

that the cable ground shall be connected to the grounding

system of the building, as close to the point of cable entry as

practical.

For Canadian model

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH

CANADIAN ICES-003.

For models having a power cord with a polarized plug:

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Modèle pour les Canadien

CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST

CONFORME À LA NORME NMB-003 DU CANADA.

Sur les modèles dont la fiche est polarisée:

ATTENTION: POUR ÉVITER LES CHOCS

ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE

DE LA FICHE DANS LA BORNE CORRESPONDANTE DE

LA PRISE ET POUSSER JUSQU'AU FOND.

The laser is covered by a housing which prevents exposure

during operation or maintenance. However, this product is

classified as a Laser Product by CDRH (Center for Devices

and Radiological Health) which is a department of the Food

and Drug Administration. According to their regulations 21

CFR section 1002.30, all manufactures who sell Laser

Products must maintain records of written communications

between the manufacturer, dealers and customers

concerning radiation safety. If you have any complaints about

instructions or explanations affecting the use of this product,

please feel free to write to the address on the back page of

this manual. When you write us, please include the model

number and serial number of your unit.

In compliance with Federal Regulations, the certification,

identification and the period of manufacture are indicated on

the rear panel.

FCC INFORMATION FOR USER

CAUTION:

The user changes or modifications not expressly approved

by the party responsible for compliance could void the user's

authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more

of the following measures:

· Reorient or relocate the receiving antenna.

· Increase the separation between the equipment and

receiver.

· Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

· Consult the dealer or an experienced radio/TV technician

for help.

21. Replacement Parts When replacement parts are

required, be sure the service technician has used

replacement parts specified by the manufacturer or have

the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric

shock, or other hazards.

22. Safety Check Upon completion of any service or

repairs to the appliance, ask the service technician to

perform safety checks to determine that the appliance is

in proper operation condition.

23. Wall or Ceiling Mounting The appliance should be

mounted to a wall or ceiling only as recommended by the

manufacturer.

24. Heat The appliance should be situated away from heat

sources such as radiators, heat registers, stoves, or

other appliances (including amplifiers) that produce heat.

25. Liquid Hazards The appliance should not be exposed

to dripping or splashing and no objects filled with liquids,

such as vases should be placed on the appliance.

FIGURE 1:

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL

ELECTRICAL CODE, ANSI/NFPA 70

GROUND

CLAMP

ELECTRIC

SERVICE

EQUIPMENT

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

GROUND CLAMPS

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ANTENNA

LEAD IN

WIRE

NEC NATIONAL ELECTRICAL CODE

S2898A

This unit contains a semiconductor laser system and is

classified as a "CLASS 1 LASER PRODUCT". So, to use

this model properly, read this Instruction Manual carefully.

In case of any trouble, please contact the store where you

purchased the unit. To prevent being exposed to the laser

beam, do not try to open the enclosure.

DANGER:

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN

AND INTERLOCK FAILED OR DEFEATED. DO NOT

STARE INTO BEAM.

CAUTION:

THIS PRODUCT UTILIZES A LASER. USE OF

CONTROLS OR ADJUSTMENTS OR PERFORMANCE

OF PROCEDURES OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE.

Precautions

7. Location of the unit

· Place the unit in a well-ventilated location.

Take special care to provide plenty of ventilation on all

sides of the unit especially when it is placed in an audio

rack. If ventilation is blocked, the unit may overheat and

malfunction.

· Do not expose the unit to direct sunlight or heating units

as the unit's internal temperature may rise and shorten

the life of the pickup.

· Avoid damp and dusty places and places directly affected

by vibrations from the speakers. In particular, avoid

placing the unit on or above one of the speakers.

· Be sure the unit is placed in a horizontal position. Never

place it on its side or on a slanted surface as it may

malfunction.

· When you place the unit near a TV, radio, or VCR, the

playback picture may become poor and the sound may

be distorted. In this case, place the unit away from the

TV, radio, or VCR.

8. Care

From time to time you should wipe the front and rear panels

and the cabinet with a soft cloth. For heavier dirt, dampen

a soft cloth in a weak solution of mild detergent and water,

wring it out dry, and wipe off the dirt. Following this, dry

immediately with a clean cloth.

Do not use rough material, thinners, alcohol or other

chemical solvents or cloths since these could damage the

finish or remove the panel lettering.

9. Notes on Handling

· When shipping the unit, use the original shipping carton

and packing materials. For maximum protection, repack

the unit as it was originally packed at the factory.

· Do not use volatile liquids, such as insect spray, near the

unit. Do not leave rubber or plastic products in contact

with the unit for a long time. They will leave marks on the

finish.

· The top and rear panels of the unit may become warm

after a long period of use. This is not a malfunction.

· When the unit is not in use, be sure to remove the disc

and turn off the power.

· If you do not use the unit for a long period, the unit may

not function properly in the future. Turn on and use the

unit occasionally.

10. To Obtain a Clear Picture

The unit is a high technology, precision device. If the optical

pick-up lens and disc drive parts are dirty or worn down,

the picture quality becomes poor. To obtain a clear picture,

we recommend regular inspection and maintenance

(cleaning or parts replacement) every 1,000 hours of use

depending on the operating environment. For details,

contact your nearest dealer.

11. Notes on Moisture Condensation

Moisture condensation damages the unit.

Please read the following carefully.

· What is moisture condensation?

Moisture condensation occurs, for example, when you

pour a cold drink into a glass on a warm day. Drops of

water form on the outside of the glass. In the same way,

moisture may condense on the optical pick-up lens inside

the unit, one of the most crucial internal parts of the unit.

· Moisture condensation occurs in the following cases.

When you bring the unit directly from a cold place to a

warm place.

When you use the unit in a room where you just turned

on the heater, or a place where the cold wind from the

air conditioner directly hits the unit.

In summer, when you use the unit in a hot and humid

place just after you move the unit from an air conditioned

room.

When you use the unit in a humid place.

· Do not use the unit when moisture condensation may

occur.

If you use the unit in such a situation, it may damage

discs and internal parts. Remove the disc, connect the

power cord of the unit to the wall outlet, turn on the unit,

and leave it for two or three hours. After a few hours, the

unit will have warmed up and evaporated any moisture.

Keep the unit connected to the wall outlet and moisture

condensation will seldom occur.

1.This unit is a CLASS 1 LASER PRODUCT and employs

a laser inside the cabinet.

2.To prevent the laser from being exposed, do not

remove the cover. Refer servicing to qualified

personnel.

1. Regional Restriction Codes (Region Number)

Regional restriction codes are built into DVD Changer

Receivers and DVD-video media for each sales region. If

the regional code of the DVD Changer Receiver does not

match one of the regional codes on the DVD-video media,

playback is not possible.

The regional number can be found on the rear panel of the

DVD Changer Receiver. (e.g. 1 for Region 1)

2. About This Manual

This manual explains the basic procedures for operating

the DVD Changer Receiver. Some DVD-video discs do not

support the full potential of the DVD technology. Your DVD

Changer Receiver may therefore not respond to all

operating commands. Refer to instruction notes on discs.

A " " mark may appear on the TV screen during operation.

It means that the operation is not permitted by the DVD

Changer Receiver or the disc.

Recording Copyright

Recording of copyrighted material for other than personal

use is illegal without permission of the copyright holder.

AC Fuse

The fuse is located inside the chassis and is not user-

serviceable. If power does not come on, contact your Onkyo

authorized service center.

Power

WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,

READ THE FOLLOWING SECTION CAREFULLY.

The voltage of the available power supply differs according

to country or region. Be sure that the power supply voltage

of the area where the unit will be used meets the required

voltage (e.g., AC 120V 60Hz) written on the rear panel.

Do not touch the unit with wet hands

Do not handle the unit or power cord when your hands are

wet or damp. If water or any other liquid enters the case,

take the unit to an authorized service center for inspection.

Table of Contents

Important Safeguards/Precautions/Table of Contents ....................................... 2-5

Getting Started

Features ................................................................................................................ 6

Supplied Accessories ............................................................................................ 7

Notes on Discs ...................................................................................................... 8

Index to Parts and Controls ................................................................................ 10

Connecting to a TV ............................................................................................. 15

Connecting Speakers .......................................................................................... 16

Positioning Speakers .......................................................................................... 17

Connecting to Audio/Video Equipment ................................................................ 18

Making Antenna Connections ............................................................................. 20

Preparing the Remote Controller ........................................................................ 22

Setup

Connecting the Power/Turning on the DVD Changer Receiver .......................... 23

Speaker Setup .................................................................................................... 24

Basic Operation

Enjoying the Sound Effects ................................................................................. 27

Various Functions Common to all the Sources ................................................... 31

Basic Playback .................................................................................................... 33

Advanced Operation

Still Frame/Slow Play .......................................................................................... 36

Repeat Play ........................................................................................................ 37

Random Play ...................................................................................................... 38

Playing in a Favorite Order ................................................................................. 39

Viewing Disc Information ..................................................................................... 40

Selecting the Audio/Subtitle Language ............................................................... 42

Using the Banner Display ................................................................................... 43

MP3 Function ...................................................................................................... 45

Customizing the Settings .................................................................................... 47

Listening to the Radio ......................................................................................... 52

Playing the Connected Source ........................................................................... 54

Recording Using the Connected Equipment ....................................................... 55

Controlling other components connected to the DVD Changer Receiver ........... 56

Other

Troubleshooting .................................................................................................. 63

Specifications ...................................................................................................... 66

Reviews

There are no reviews of this manual yet.

Related Products

Cover page of ONKYO TX-27 Owner's Manual

ONKYO DRC500 Owner's Manual

Manual details

We guarantee that...

Sample pages

Reviews

Related Products

ONKYO TX-27 Owner's Manual

ONKYO TX-82M Service Manual

ONKYO SKSHT20 Owner's Manual

ONKYO TX602E Owner's Manual

ONKYO TX-SR500E Owner's Manual

Popular Brands

General

Members Area