DV-SP800
PANEL VIEW-1
ON
STANDBY/ON
POWER
LAST MEMORY
CLEAR
REPEAT
VIDEO CIRCUIT
OFF
DIMMER
RANDOM
DISPLAY
STOP
PLAY
PAUSE
DV-SP800
SACD & DVD AUDIO/VIDEO PLAYER
PHONES LEVEL
MIN
MAX
PHONES
SACD
DVD
CD
POWER switch and STANDBY indicator
Turns on the main power supply for the DV-SP800.
The DV-SP800 enters standby state and the STANDBY indicator
lights up. Pressing the switch again to the off position (
OFF)
shuts down the main power supply into the DV-SP800.
Before turning on the power, make sure all cables are properly
connected.
STANDBY/ON button
When STANDBY/ON button is pressed to ON while the POWER
switch is set to ON, the DV-SP800 turns on and the STANDBY
indicator turns off. The indicator around
button lights up.
Pressing the button again returns the DV-SP800 to the standby
state. This state turns off the display, disables control functions.
VIDEO CIRCUIT OFF button and indicator
Press to switch the video signal off.
LAST MEMORY button
You can resume DVD or Video CD playback from the point you
last watched even if the disc is removed from the player. Press
LAST MEMORY during playback to set a Last Memory point.
When you want to resume playback of that disc, press LAST
MEMORY in the stop mode and playback starts from the
memorized point. Last Memory locations can be stored for up to 5
DVDs and 1 Video CD.
CLEAR button
Works in conjunction with a number of player functions. Use to
cancel repeat and random playback, and to edit programs.
DISC indicator
When playing a disc, the appropriate disc type indicator lights up.
Disc tray
When loading a disc, place discs in the disc tray with the label
side facing up.
TOP MENU button
Press to call up the top menu programmed on the DVD.
Depending on the DVD, the top menu may be identical to the
DVD menu.
Cursor ( // / ) button/ENTER button
Use
/ / /
to move through the options on menu screens and
to change settings. Use ENTER to implement settings selected
with the cursor buttons or to set items highlighted in a menu.
MENU button
Use to display or close the DVD menu or MP3 Navigator screen.
button
Press to open and close the disc tray.
PAUSE button
Press during playback to pause. Press again to resume playback.
STOP button
Press to stop playback. Whenever a disc is loaded in the player,
indicator above
STOP lights up.
PLAY button
Press to start or resume playback. Whenever a disc is loaded in
the player, indicator above
PLAY lights up.
DIMMER button
Toggle to control the lightness of the display (4 steps).
REPEAT button
Use to set the repeat mode.
RANDOM button
Press to play chapters/tracks in random order.
Remote control sensor
Point the remote control toward the remote sensor to operate the
player.
RETURN button
Use to go one menu back (current settings are maintained). Use
RETURN when you do not want to change the option setting in a
menu.
SETUP button
Press when the player is in either play or stop mode to open and
close the Setup screen.
DISPLAY button
Press during playback to display statistical disc information.
Press repeatedly to display different information.
/
button
Press to go back or advance to previous chapters/tracks. Press
and hold to perform fast-reverse/fast-forward playback scanning.
PHONES jack
This is a standard stereo jack for connecting stereo headphones.
The audio for the ANALOG OUTPUT CH 1 and CH 2 are sent to
the headphone speakers.
PHONES LEVEL dial
Use to control the phones level. Turn the dial clockwise to
increase the phones level and counterclockwise to decrease it.
FRONT PANEL
1
2
3
4
5
6
7
8
9 10 11
12
13
14
15
16
17
18
19
20
21
22
23
24
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
