ONKYO HTP2 Owner's Manual

Cover page of ONKYO HTP2 Owner's Manual

Owner's Manual for ONKYO HTP2, downloadable as a PDF file.

We also have service manual to this model.

Manual details

  • Immediate download after payment.
  • Delivered as a PDF file.
  • The manual has 10 pages
  • File size: 0.17 MB
  • Available language versions: Japanese, English, Chinese Traditional
  • Different language versions may vary sligthly in file size and page count.

We guarantee that...

  • our manuals are complete,
  • our manuals are checked with antivirus,
  • We'll issue refund if the manual is damaged, incomplete or unreadable (our refund policy)

Sample pages

Thumbnail of page 1Thumbnail of page 2Thumbnail of page 3Thumbnail of page 4
Thumbnail of page 5Thumbnail of page 6Thumbnail of page 7Thumbnail of page 8
Thumbnail of page 9
background image
HTP-2
Instruction Manual
SPEAKER SYSTEM
Thank you for your purchase of the Onkyo speaker system.
Please read this manual thoroughly before using it.
Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your
new speaker system.
Please retain this manual for future reference.
HTP-2
English
SPEAKER SYSTEM
SL-105
POWERED SUBWOOFER
D-L5
× 5
SATELLITE SPEAKERS
background image
HTP-2
Instruction Manual
SPEAKER SYSTEM
Thank you for your purchase of the Onkyo speaker system.
Please read this manual thoroughly before using it.
Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your
new speaker system.
Please retain this manual for future reference.
HTP-2
English
SPEAKER SYSTEM
SL-105
POWERED SUBWOOFER
D-L5
× 5
SATELLITE SPEAKERS
background image
2
Important Safeguards
1. Read Instructions ­ All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions ­ The safety and operating instructions
should be retained for future reference.
3. Heed Warnings ­ All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions ­ All operating and use instructions should
be followed.
5. Cleaning ­ Unplug the appliance from the wall outlet before
cleaning. The appliance should be cleaned only as recommended
by the manufacturer.
6. Attachments ­ Do not use attachments not recommended by
the appliance manufacturer as they may cause hazards.
7. Water and Moisture ­ Do not use the appliance near water ­
for example, near a bath tub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming pool; and the like.
8. Accessories ­ Do not place the appliance on an unstable cart,
stand, tripod, bracket, or table. The appliance may fall, causing
serious injury to a child or adult, and serious damage to the
appliance. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the appliance.
Any mounting of the appliance
should follow the manufacturer's
instructions, and should use a
mounting accessory recommended
by the manufacturer.
9. An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.
10. Ventilation ­ Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the appliance and
to protect it from overheating, and these openings must not be
blocked or covered. The openings should never be blocked by
placing the appliance on a bed, sofa, rug, or other similar
surface. The appliance should not be placed in a builtin installation
such as a bookcase or rack unless proper ventilation is provided.
There should be free space of at least 20 cm (8 in.) and an
opening behind the appliance.
11. Power Sources ­ The appliance should be operated only from
the type of power source indicated on the marking label. If you
are not sure of the type of power supply to your home, consult
your appliance dealer or local power company.
12. Grounding or Polarization ­ The appliance may be equipped
with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet
only one way. This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the polarized
plug.
13. Power-Cord Protection ­ Power supply cords should be
routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention
to cords at plugs, convenience receptacles, and the point where
they exit from the appliance.
14. Lightning ­ For added protection for the appliance during a
lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the
appliance due to lightning and power-line surges.
15. Overloading ­ Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in a risk of
fire or electric shock.
16. Object and Liquid Entry ­ Never push objects of any kind into
the appliance through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the appliance.
17. Servicing ­ Do not attempt to service the appliance yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service
personnel.
18. Damage Requiring Service ­ Unplug the appliance form the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have fallen into the appliance,
C. If the appliance has been exposed to rain or water,
D. If the appliance does not operate normally by following the
operating instructions. Adjust only those controls that are covered
by the operating instructions as an improper adjustment of other
controls may result in damage and will often require extensive
work by a qualified technician to restore the appliance to its
normal operation,
E. If the appliance has been dropped or damaged in any way, and
F. When the appliance exhibits a distinct change in performance
­ this indicates a need for service.
19. Replacement Parts ­ When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics
as the original part. Unauthorized substitutions may result in
fire, electric shock, or other hazards.
20. Safety Check ­ Upon completion of any service or repairs to the
appliance, ask the service technician to perform safety checks
to determine that the appliance is in proper operation condition.
21. Wall or Ceiling Mounting ­ The appliance should be mounted
to a wall or ceiling only as recommended by the manufacturer.
22. Heat ­ The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
PORTABLE CART WARNING
S3125A
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance
(servicing)
instructions
in
the
literature
accompanying the appliance.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS
OUVRIR
AVIS
background image
3
Precautions
For European model
For British model
Replacement and mounting of an AC plug on the power
supply cord of this unit should be performed only by qualified
service personnel.
IMPORTANT
The wires in the mains lead are coloured in accordance with
the following code:
Blue:
Neutral
Brown:
Live
As the colours of the wires in the mains lead of this appliance
may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the
terminal in the plug which is marked with the letter N or
coloured black.
The wire which is coloured brown must be connected to the
terminal in the plug which is marked with the letter L or
coloured red.
IMPORTANT
A 5 ampere fuse is fitted in this plug. Should the fuse need to
be replaced, please ensure that the replacement fuse has a
rating of 5 amperes and that it is approved by ASTA or BSI
to BS1362. Check for the ASTA mark or the BSI mark on the
body of the fuse.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME, THEN THE FUSE
SHOULD BE REMOVED AND THE PLUG CUT OFF AND
DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE
ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED
INTO ANY 13 AMPERE SOCKET.
If in any doubt, please consult a qualified electrician.
1. Recording Copyright
Recording of copyrighted material for other than personal
use is illegal without permission of the copyright holder.
2. AC Fuse
The fuse is located inside the chassis and is not user-
serviceable.
If power does not come on, contact your Onkyo authorized
service station.
3. Care
From time to time you should wipe off the front and rear
panels and the cabinet with a soft cloth. For heavier dirt,
dampen a soft cloth in a weak solution of mild detergent
and water, wring it out dry, and wipe off the dirt. Following
this, dry immediately with a clean cloth. Do not use rough
material, thinners, alcohol or other chemical solvents or
cloths since these may damage the finish or remove the
panel lettering.
4. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST
TIME, READ THE FOLLOWING SECTION
CAREFULLY.
The voltage of the available power supply differs according
to country or region. Be sure that the power supply
voltage of the area where this unit will be used meets the
required voltage (e.g., AC230 V 50 Hz or AC120 V 60 Hz)
written on the rear panel.
For Canadian model
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Modele pour les Canadien
ATTENTION: POUR ÉVITER LES CHOCS
ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE
DE LA FICHE DANS LA BORNE CORRESPONDANTE DE
LA PRISE ET POUSSER JUSQU'AU FOND.
Declaration of Conformity
We, ONKYO EUROPE
ELECTRONICS GmbH
INDUSTRIESTRASSE 20
82110 GERMERING,
GERMANY
GERMERING, GERMANY
ONKYO EUROPE ELECTRONICS GmbH
I. MORI
declare in own responsibility, that the ONKYO product described
in this instruction manual is in compliance with the corresponding
technical standards such as EN60065, EN55013, EN55020 and
EN61000-3-2, -3-3.
background image
4
Control positions and names
Front panel
The HTP-2 is a 5.1-channel speaker package that consists of five satellite speakers and one subwoofer
with an internal amplifier. The HTP-2 features the SL-105 subwoofer with L/R mixing circuits and a built-
in cut-off filter as the subwoofer and the D-L5 speakers with an aluminum cabinet and OMF-cone as the
five satellite speakers. Simply connect the speakers to your AV amplifier or receiver for superb
surround audio playback.
Feature
A Low-level input jacks (LINE INPUT)
Connect these jacks to the LINE OUT jacks of the
amplifier etc.
B Auto standby switch (AUTO STANDBY)
This switch is used to turn on and off the auto standby
function.
ON: This activates the auto standby function.
If a constant level signal is not received from the
amplifier (or receiver) over a period of a few minutes,
the SL-105 automatically enters the standby state. If a
constant level signal is later received from the amplifier
(or receiver), the power is automatically turned back on.
OFF: Deactivates the auto standby function.
Notes:
· The auto standby function operates on the existence
or absence of a constant level input signal. If the auto
standby function does not operate properly, try
slightly increasing (or decreasing) the output level of
the amplifier or receiver. (Note that output levels of
some amplifiers and receivers cannot be adjusted.
For more details regarding your components, refer to
the instruction manual supplied with them.)
· If noise from peripheral components causes the
incorrect operation of the auto standby function, or if
outputting low volumes (i.e., during the nighttime)
causes the auto standby function to activate, turn off
the auto standby function.
· The auto standby function only operates while the
power switch for the SL-105 is turned on.
C Speaker-level input terminals
(INPUT FROM AMP/RECEIVER)
Connect these input terminals to the speaker output
terminals of your amplifier or receiver.
D Speaker-level output terminals
(OUTPUT TO SPEAKERS)
The speaker-level signal to the front speakers is output
from these terminals.
1
Power switch (POWER) and indicator
Pressing this button turns the power on (the indicator
lights). Pressing the button again turns the power off
(the indicator goes out).
Red:
Unit is in standby mode
Green:
Unit is in operation
2
Frequency adjusting knob (FREQUENCY)
Use this knob to select the high-frequency range at
which you wish to cut off the signal to the subwoofer.
You can select any frequency between 50 Hz and 200
Hz depending on the characteristics of the speaker
system being used with the SL-105.
3
Output level adjusting knob (OUTPUT LEVEL)
Use this knob to adjust the output level of the
subwoofer.
Rear panel
R
SPEAKER LEVEL
INPUT
FROM
AMP/RECEIVER
AUTO STANDBY
LINE
INPUT
L
R
OFF
ON
OUTPUT
TO SPEAKERS
(MONO)
+
_
L
+
_
R
+
_
L
+
_
SL-105
C
DA B
To AC outlet
FREQUENCY
OUTPUT LEVEL
MIN
MAX
50Hz
200Hz
POWER
POWERED SUBWOOFER
SL-105
1
23
I Subwoofer SL-105
background image
5
Speaker placement
I Layout of your speaker system
Satellite speakers
The supplied satellite speakers are all of the same
functionality, so use three as the left/right front and center
speakers, and two as the surround speakers.
Front left/right speakers and center speakers
These three speakers should be placed in front of the
listener.
· All three speakers should be placed at the same
level.
· Placement should be such so that the speakers all
aim at the ears of the listener when the listener is
listening to music or watching the screen. The center
speakers enhance the sound effects from the two
front speakers and add clarity to movements in the
sound for a much richer sound image.
Surround left/right speakers
Surround speakers should be placed to the side of the
listener or behind the listener. These speakers produce
sound movements in all directions, create a sound
environment that reflects the background, and create
the sensation of being in the middle of the action.
Subwoofer
The subwoofer can be installed anywhere in the room, but
in most situations you will obtain the best results by placing
the subwoofer to the side near a corner of the room. The
quality and level of the bass sounds from the subwoofer will
differ depending on the location where the subwoofer is
placed and the layout of the room, so it is recommended to
place the subwoofer in several locations and find the
position that provides the best results.
TV or Screen
Center
speaker
Surround
right
speaker
Surround
left
speaker
Listener
Sub-
woofer
(SL-105)
Front
left
speaker
Front
right
speaker
I Securing the satellite speakers
Mounting the speakers on the wall
Make sure that the walls are rigid enough for supporting the
speaker's weight. Since the weight a mounting screw can
support varies greatly depending on the wall material and
the position of the reinforcing ribs embedded in the wall, be
sure to check the wall strength at the location where the
mounting screws will be placed. Use the thickest and
longest possible mounting screws whose head diameter is
less than 7.5 mm and shank diameter is less than 3.5 mm.
The screws should stick out from the wall at a length
between 9 and 17 mm. (Requesting such a screw from a
manufacturer is recommended.)
I Using spacers
Attaching the supplied spacers is recommended for
obtaining the best sound quality. Also, by attaching the
provided spacers, the speakers will not slide easily for a
more stable installation.
9 to 17 mm
3.5 mm
or less
7.5 mm
or less
Installation using commercially-available stands and
fixtures
The speaker bottoms are equipped with screw holes so that
you can attach commercially-available stands or mounting
fixtures for a variety of mounting options. (M5 x 2 screw
holes; 60-mm pitch)
Note:
When attaching an accessory item to a speaker, be careful
of the length of the screws used. Use only screws that
provide the required strength with a screw length between 7
and 10 mm.

Reviews

There are no reviews of this manual yet.