ONKYO MB-S1 Service Manual

ONKYO MB-S1 Service Manual
0 Rating(s)
Read reviews

Service Manual for ONKYO MB-S1, downloadable as a PDF file.

We also have owner's manual to this model.

Manual details

Immediate download after payment.
Delivered as a PDF file.
The manual has 58 pages
File size: 2.3 MB
Available language versions: English
Different language versions may vary sligthly in file size and page count.

We guarantee that...

our manuals are complete,
the manual includes circuit diagrams,
our manuals are checked with antivirus,
We'll issue refund if the manual is damaged, incomplete or unreadable (our refund policy)

Sample pages

Contents

Thank you for purchasing the Onkyo Hard Disk Music

Library.

Please read this manual thoroughly before making

connections and plugging in the unit. Following the

instructions in this manual will enable you to obtain

optimum performance and listening enjoyment from

your new Hard Disk Music Library. Please retain this

manual for future reference.

MB-S1

Appendix

Remote controller

Setup and operation

Before using

Hard Disk Music Library

Instruction Manual

Facilities and connections

Contents

Thank you for purchasing the Onkyo Hard Disk Music

Library.

Please read this manual thoroughly before making

connections and plugging in the unit. Following the

instructions in this manual will enable you to obtain

optimum performance and listening enjoyment from

your new Hard Disk Music Library. Please retain this

manual for future reference.

MB-S1

Appendix

Remote controller

Setup and operation

Before using

Hard Disk Music Library

Instruction Manual

Facilities and connections

1. Read Instructions All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions The safety and operating instructions

should be retained for future reference.

3. Heed Warnings All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions All operating and use instructions

should be followed.

5. Cleaning Unplug the appliance from the wall outlet before

cleaning. The appliance should be cleaned only as recom-

mended by the manufacturer.

6. Attachments Do not use attachments not recommended by

the appliance manufacturer as they may cause hazards.

7. Water and Moisture Do not use the appliance near water

for example, near a bath tub, wash bowl, kitchen sink, or laun-

dry tub; in a wet basement; or near a swimming pool; and the

like.

8. Accessories Do not place the appliance on an unstable cart,

stand, tripod, bracket, or table. The appliance may fall, causing

serious injury to a child or adult, and serious damage to the

appliance. Use only with a cart, stand, tripod, bracket, or table

recommended by the manufacturer, or sold with the appliance.

Any mounting of the appliance should follow the

manufacturer's instructions, and

should use a mounting accessory

recommended by the manufac-

turer.

9. An appliance and cart combina-

tion should be moved with care.

Quick stops, excessive force, and

uneven surfaces may cause the

appliance and cart combination to

overturn.

10. Ventilation Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of the appliance

and to protect it from overheating, and these openings must not

be blocked or covered. The openings should never be blocked

by placing the appliance on a bed, sofa, rug, or other similar

surface. The appliance should not be placed in a builtin installa-

tion such as a bookcase or rack unless proper ventilation is pro-

vided. There should be free space of at least 5 cm (2 in.) and an

opening behind the appliance.

11. Power Sources The appliance should be operated only from

the type of power source indicated on the marking label. If you

are not sure of the type of power supply to your home, consult

your appliance dealer or local power company.

12. Grounding or Polarization The appliance may be equipped

with a polarized alternating current line plug (a plug having one

blade wider than the other). This plug will fit into the power

outlet only one way. This is a safety feature. If you are unable to

insert the plug fully into the outlet, try reversing the plug. If the

plug should still fail to fit, contact your electrician to replace

your obsolete outlet. Do not defeat the safety purpose of the

polarized plug.

13. Power-Cord Protection Powersupply cords should be

routed so that they are not likely to be walked on or pinched by

items placed upon or against them, paying particular attention

to cords at plugs, convenience receptacles, and the point where

they exit from the appliance.

14. Lightning For added protection for the appliance during a

lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and discon-

nect the antenna or cable system. This will prevent damage to

the appliance due to lightning and power-line surges.

15. Overloading Do not overload wall outlets, extension cords,

or integral convenience receptacles as this can result in a risk of

fire or electric shock.

16. Object and Liquid Entry Never push objects of any kind

into the appliance through openings as they may touch danger-

ous voltage points or short-out parts that could result in a fire or

electric shock. Never spill liquid of any kind on the appliance.

17. Servicing Do not attempt to service the appliance yourself as

opening or removing covers may expose you to dangerous volt-

age or other hazards. Refer all servicing to qualified service

personnel.

18. Damage Requiring Service Unplug the appliance form the

wall outlet and refer servicing to qualified service personnel

under the following conditions:

A. When the power-supply cord or plug is damaged,

B. If liquid has been spilled, or objects have fallen into the appli-

ance,

C. If the appliance has been exposed to rain or water,

D. If the appliance does not operate normally by following the

operating instructions. Adjust only those controls that are cov-

ered by the operating instructions as an improper adjustment of

other controls may result in damage and will often require ex-

tensive work by a qualified technician to restore the appliance

to its normal operation,

E. If the appliance has been dropped or damaged in any way, and

When the appliance exhibits a distinct change in performance

this indicates a need for service.

19. Replacement Parts When replacement parts are required, be

sure the service technician has used replacement parts specified

by the manufacturer or have the same characteristics as the

original part. Unauthorized substitutions may result in fire,

electric shock, or other hazards.

20. Safety Check Upon completion of any service or repairs to

the appliance, ask the service technician to perform safety

checks to determine that the appliance is in proper operation

condition.

21. Wall or Ceiling Mounting The appliance should be mounted

to a wall or ceiling only as recommended by the manufacturer.

22. Heat The appliance should be situated away from heat

sources such as radiators, heat registers, stoves, or other appli-

ances (including amplifiers) that produce heat.

23. The apparatus shall not be exposed to dripping or splashing and

that no objects filled with liquids, such as vases shall be placed

on the apparatus.

Important Safeguards

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS

OUVRIR

AVIS

PORTABLE CART WARNING

S3125A

1. Recording Copyright

Recording of copyrighted material for other than personal use is

illegal without permission of the copyright holder.

2. Power

WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,

READ THE FOLLOWING SECTION CAREFULLY.

The voltage of the available power supply differs according to

country or region. Be sure that the power supply voltage of the area

where this unit will be used meets the required voltage (e.g., AC

230 V, 50 Hz or AC 120 V, 60 Hz) written on the rear panel.

Turning off the standby button does not shut off the power com-

pletely. So the power cord should be removed from the AC outlet

when the unit is not used for a prolonged time.

3. Do not touch this unit with wet hands

Do not handle this unit or power cord when your hands are wet or

damp. If water or any other liquid enters the case, take this unit to

an authorized service center for inspection.

4. Location of this unit

Place this unit in a well-ventilated location.

Take special care to provide plenty of ventilation on all sides of this

unit especially when it is placed in an audio rack. If ventilation is

blocked, this unit may overheat and malfunction.

Do not expose this unit to direct sunlight or heating units as this

unit's internal temperature may rise and shorten the life of the

pickup.

Avoid damp and dusty places and places directly affected by vibra-

tions from the speakers. In particular, avoid placing the unit on or

above one of the speakers.

Be sure this unit is placed in a horizontal position. Never place it on

its side or on a slanted surface as it may malfunction.

Do not place near tuners or TV sets.

If placed next to a TV or tuner, it may cause reception interference

resulting in some noise in the TV or tuner output.

5. Care

From time to time you should wipe the front and rear panels and the

cabinet with a soft cloth. For heavier dirt, dampen a soft cloth in a

weak solution of mild detergent and water, wring it out dry, and

wipe off the dirt. Following this, dry immediately with a clean

cloth.

Do not use rough material, thinners, alcohol or other chemical sol-

vents or cloths since these could damage the finish or remove the

panel lettering.

6. Points to remember

If this unit is brought from a cold environment to a warm one or is

in a cold room that is quickly heated, condensation may form on the

pickup, preventing proper operation. In this case, remove the disc

and leave the power ON for about one hour to remove the conden-

sation.

When transporting this unit, be careful not to bump it.

DANGER:

INVISIBLE LASER RADIATION WHEN OPEN AND INTER-

LOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE

TO BEAM.

CAUTION:

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS

OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

For U.S. model

The laser is covered by a housing which prevents exposure during

operation or maintenance. However, this product is classified as a

Laser Product by CDRH (Center for Devices and Radiological

Health) which is a department of the Food and Drug Administra-

tion. According to their regulations 21 CFR section 1002.30, all

Precautions

manufactures who sell Laser Products must maintain records of

written communications between the manufacturer, dealers and

customers concerning radiation safety. If you have any complaints

about instructions or explanations affecting the use of this product,

please feel free to write to the address on the back page of this

manual. When you write us, please include the model number and

serial number of your unit.

In compliance with Federal Regulations, the certification, identifi-

cation and the period of manufacture are indicated on the rear

panel.

FCC INFORMATION FOR USER

CAUTION:

The user changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to

operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installa-

tion. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equip-

ment off and on, the user is encouraged to try to correct the interfer-

ence by one or more of the following measures:

· Reorient or relocate the receiving antenna.

· Increase the separation between the equipment and receiver.

· Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

· Consult the dealer or an experienced radio/TV technician for

help.

Declaration of Conformity

We, ONKYO EUROPE

ELECTRONICS GmbH

INDUSTRIESTRASSE 20

82110 GERMERING,

GERMANY

GERMERING, GERMANY

ONKYO EUROPE ELECTRONICS GmbH

I. MORI

declare in own responsibility, that the ONKYO product described

in this instruction manual is in compliance with the corresponding

technical standards such as EN60065, EN55013, EN55020 and

EN61000-3-2, -3-3.

Memory Preservation

This unit does not require memory preservation batteries. A

built-in memory power back-up system preserves the contents

of the memory during power failures and even when the unit is

unplugged. The unit must be plugged-in in order to charge the

back-up system.

The memory preservation period after the unit has been un-

plugged varies depending on climate and placement of the

unit. On the average, memory contents are protected over a

period of a few weeks after the last time the unit was un-

plugged. This period is shorter when the unit is exposed to a

highly humid climate.

For Canadian model

NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES

WITH CANADIAN ICES-003.

For models having a power cord with a polarized plug:

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Modele pour les Canadien

REMARQUE: CET APPAREIL NUMÉRIQUE DE LA

CLASSE B EST CONFORME À LA NORME NMB-003 DU

CANADA.

Sur les modèles dont la fiche est polarisée:

ATTENTION:

POUR

ÉVITER

LES

CHOCS

ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE

DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA

PRISE ET POUSSER JUSQU'AU FOND.

For European model

This unit contains a semiconductor laser system and is classified as

a "CLASS 1 LASER PRODUCT". So, to use this model properly,

read this Instruction Manual carefully. In case of any trouble,

please contact the store where you purchased the unit. To prevent

being exposed to the laser beam, do not try to open the enclosure.

Precautions

"CLASS 1 LASER

PRODUCT"

This label on the left hand panel states that:

1. This unit is a CLASS 1 LASER PRODUCT and employs a laser

inside the cabinet.

2. To prevent the laser from being exposed, do not remove the

cover. Refer servicing to qualified personnel.

For British model

Replacement and mounting of an AC plug on the power supply

cord of this unit should be performed only by qualified service per-

sonnel.

IMPORTANT

The wires in the mains lead are coloured in accordance with the

following code:

Blue

: Neutral

Brown : Live

As the colours of the wires in the mains lead of this apparatus may

not correspond with the coloured markings identifying the termi-

nals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal

which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the termi-

nal which is marked with the letter L or coloured red.

IMPORTANT

A 5 ampere fuse is fitted in this plug. Should the fuse need to be

replaced, please ensure that the replacement fuse has a rating of 5

amperes and that it is approved by ASTA or BSI to BS1362. Check

for the ASTA mark or the BSI mark on the body of the fuse.

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE

SOCKET OUTLET IN YOUR HOME, THEN THE FUSE

SHOULD BE REMOVED AND THE PLUG CUT OFF AND DIS-

POSED OF SAFELY. THERE IS A DANGER OF SEVERE

ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED

INTO ANY 13 ampere SOCKET.

If in any doubt, please consult a qualified electrician.

Contents

Before using

Important Safeguards ......................................... 2

Precautions ......................................................... 3

Contents .............................................................. 4

Features ............................................................... 6

Supplied accessories ......................................... 6

Before using this unit ......................................... 7

Setting the Voltage selector (Worldwide models only) ... 7

Installing the remote controller batteries ......................... 7

Using the remote controller .............................................. 7

Facilities and connections

Front panel facilities ........................................... 8

Remote controller ............................................. 10

Rear panel facilities .......................................... 12

Connections ...................................................... 15

Connecting your audio components .............................. 15

Connecting your video components .............................. 16

Connecting speakers ....................................... 19

Ideal speaker configuration ............................................ 19

Minimum speaker configuration for

surround sound playback ........................................ 19

Speaker placement .......................................................... 19

Connecting speakers ....................................................... 20

Connecting the speaker cable ......................................... 20

Connecting a subwoofer ................................................. 20

Connecting the remote zone (Zone 2)

speakers ....................................................... 21

When using the ZONE 2 OUT terminals ...................... 21

Operating components not reached by the

remote controller signals (IR IN/OUT) ....... 22

If the remote controller signal does not reach

the TX-DS797 remote sensor ................................. 22

If the remote controller signal does not reach

other components .................................................... 22

Connecting the power ...................................... 23

Connecting antennas ....................................... 24

Assembling the AM loop antenna .................................. 24

Connecting the AM antenna cable ................................. 24

Connecting the included antennas ................................. 24

Connecting an FM outdoor antenna ............................... 25

Connecting an AM outdoor antenna .............................. 25

Directional linkage ......................................................... 25

Connecting the antenna cable to the 75/300

antenna adapter

(For all models other than European models) .............. 25

Setup and operation

Setup menus ..................................................... 26

Navigating through the Setup menu .............................. 27

Hardware Setup ................................................. 28

0. Hardware Setup menu ............................................. 28

0-1. Speaker Impedance sub-menu ................................ 28

0-2. IR IN Setup sub-menu ............................................ 28

0-3. AM Frequency Step sub-menu ............................... 28

Speaker Setup ................................................... 29

1. Speaker Setup menu ................................................. 29

1-1. Speaker Config sub-menu ...................................... 29

1-2. Speaker Distance sub-menu .................................... 30

1-3. Level Calibration sub-menu ................................... 31

1-4. Bass Peak Level (Bass Peak Level Manager*)

sub-menu ................................................................. 32

Input Setup ........................................................ 33

2. Input Setup menu ..................................................... 33

2-1. Digital Setup sub-menu .......................................... 33

2-2. Multichannel Setup sub-menu ................................ 34

2-3. Video Setup sub-menu ............................................ 35

2-4. Character Input sub-menu ...................................... 36

2-5. Intelli Volume sub-menu ......................................... 36

2-6. Listening Mode Preset sub-menu ........................... 37

Audio Adjust ...................................................... 40

3. Audio Adjust Setup menu ........................................ 40

Preference ......................................................... 44

4. Preference menu ....................................................... 44

4-1. Volume Setup sub-menu ......................................... 44

4-2. Headphones Level Setup sub-menu ....................... 45

4-3. OSD Setup sub-menu .............................................. 45

4-4. OSD Position sub-menu ......................................... 45

Listening to Radio Broadcasts ........................ 46

Tuning into a radio station ............................................. 46

Listening to a stereo radio station (FM mode) .............. 46

Presetting a radio station ................................................ 47

Selecting a preset radio station ...................................... 47

Erasing a preset radio station ......................................... 47

Listening to RDS broadcasts

(European models only) .............................. 48

Listening to RDS broadcasts .......................................... 48

PTY program types in Europe ........................................ 48

Displaying Radio Text (RT) ........................................... 49

Performing a PTY scan .................................................. 49

Performing a TP scan ..................................................... 49

Reviews

There are no reviews of this manual yet.

Related Products

ONKYO TA-2010 Service Manual

This manual has 13 pages, file size: 1.25 MB. It's available in languages: English.

ONKYO TA-R240 Service Manual

This manual has 15 pages, file size: 0.89 MB. It's available in languages: English.

ONKYO K-185X Service Manual

This manual has 14 pages, file size: 0.64 MB. It's available in languages: English.

ONKYO TX-SV636 Owner's Manual

This manual has 46 pages, file size: 4.99 MB. It's available in languages: English.

ONKYO A8850 Service Manual

This manual has 20 pages, file size: 4.57 MB. It's available in languages: English.

ONKYO MB-S1 Service Manual

Manual details

We guarantee that...

Sample pages

Reviews

Related Products

ONKYO TA-2010 Service Manual

ONKYO TA-R240 Service Manual

ONKYO K-185X Service Manual

ONKYO TX-SV636 Owner's Manual

ONKYO A8850 Service Manual

Popular Brands

General

Members Area