Format:
Auto reverse double deck
Track format:
4-tracks, 2-channels
Recording system:
AC bias
Erasing system:
AC erase
Tape speed:
4.76 cm/sec. (1-7/8 i.p.s)
Wow and Futter:
0.13 % (WRMS)
Frequency response:
Metal position tape 30 Hz to 15 kHz ±3 dB
High position tape
30 Hz to 14 kHz ±3 dB
Normal position tape 30 Hz to 13 kHz ±3 dB
Signal to noise ratio: 56 dB (metal position tape/ Type IV,
Dolby NR off)
55 dB (high position/ Type II, Dolby NR
off)
50 dB (normal position/ Type I, Dolby
NR off)
Noise reduction of 10 dB above 5 kHz
and 5 dB at 1 kHz possible with Dolby B.
Noise reduction of 20 dB at 5 kHz
possible with Dolby C.
Input Jacks:
LINE IN:
2
Input sensitivity:
80 mV
Input impedance:
50 k ohm
Output Jacks:
LINE OUT:
2
Standard output level: 500 mV
Output load impedance:over 50 k ohm
Motors:
DC servo motor: 1+1
Heads:
PB Head:
Special Hard Permalloy x 1
Rec/PB Head:
Special Hard Permalloy x 1
Erase head:
Ferrite x 1
Power supply rating: North American: AC 120 V, 60 Hz
European: AC 230 - 240 V, 50 Hz
Power consumption: 17 W
Standby power consumption:
North American: 7.0 W
European: 0.6 W
Dimensions: (W x H x D):
435 mm x 121 mm x 303 mm
(17-1/8" x 4-3/4" x 11-15/16")
Weight:
4.9 kg (10.8 lbs.)
Operation condition temperature/humidity:
5 C - 35 C/ 5% - 85% (no condensation)
Specifications and external appearance are subject to change
without notice because of product improvements.
TA-RW255
SPECIFICATIONS
