BD-V1100
2
1. CONTRAST OF MISCELLANEOUS PARTS
7 CONTRAST OF TABLE
BD-V1100/KU and BD-V1000/KU are constructed the same except for the following:
PCB ASSEMBLY
P5 - 2
MAIN Assy
BWM1263
BWM1295
PACKING
P3 - 4
Packing Case
BHD1443
BHD1479
EXTERIOR
P5 -13
Rear Panel
BNC1120
BNC1158
P5 -15
Ground Plate
ANK1074
Not used
P5 -16
Ground Plate (2P)
ANK1156
Not used
P5 -21
UPC Label
BAX1257
BAX1278
Ref.
No.
Remarks
BD-V1000/KU
BD-V1100/KU
Part No.
Mark
Symbol and Description
NOTES :
÷ Parts marked by " NSP " are generally unavailable because they are not in our Master Spare Parts List.
÷ The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
÷ Reference Nos. indicate the pages and Nos. in the service manual for the base model.
÷ When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex. 1
When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by
J = 5%, and K = 10%).
560
= 56 × 101= 561 ................................................... RD1/4PU 5 6 1 J
47k
= 47 × 10 3 = 473 .................................................. RD1/4PU 4 7 3 J
0.5
= R50 ...................................................................... RN2H Â 5 0 K
1
= 1R0 ......................................................................... RS1P 1 Â 0 K
Ex. 2
When there are 3 effective digits (such as in high precision metal film resistors).
5.62k
= 562 × 10 1 = 5621 ........................................... RN1/4PC 5 6 2 1 F
¶ For PCB ASSEMBLY, Refer to "CONTRAST OF PCB ASSEMBLIES".
