PIONEER CDJ-400/KUCXJ Owner's Manual

PIONEER CDJ-400/KUCXJ Owner's Manual
0 Rating(s)
Read reviews

Owner's Manual for PIONEER CDJ-400/KUCXJ, downloadable as a PDF file.

We also have service manual to this model.

Manual details

Immediate download after payment.
Delivered as a PDF file.
The manual has 24 pages
File size: 1.21 MB
Available language versions: French, English
Different language versions may vary sligthly in file size and page count.

We guarantee that...

our manuals are complete,
our manuals are checked with antivirus,
We'll issue refund if the manual is damaged, incomplete or unreadable (our refund policy)

Sample pages

Operating Instructions

COMPACT DISC PLAYER

CDJ-400

Operating Instructions

COMPACT DISC PLAYER

CDJ-400

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

"dangerous voltage" within the product's

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

CAUTION:

TO PREVENT THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT

D3-4-2-1-1_En-A

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

D8-10-1-2_En

WARNING

This equipment is not waterproof. To prevent a fire

or shock hazard, do not place any container filled

with liquid near this equipment (such as a vase or

flower pot) or expose it to dripping, splashing, rain

or moisture.

D3-4-2-1-3_A_En

WARNING: Handling the cord on this product or

cords associated with accessories sold with the

product will expose you to chemicals listed on

proposition 65 known to the State of California and

other governmental entities to cause cancer and

birth defect or other reproductive harm.

D36-P4_A_En

Wash hands after handling

NOTE: THE NO USER-SERVICEABLE PARTS COMPARTMENT WARNING IS LOCATED ON THE APPLIANCE BOTTOM.

This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la Classe B est conforme

à la norme NMB-003 du Canada.

D8-10-1-3_EF

IMPORTANT NOTICE THE SERIAL NUMBER FOR

THIS EQUIPMENT IS LOCATED ON THE BOTTOM.

PLEASE WRITE THIS SERIAL NUMBER ON YOUR

ENCLOSED WARRANTY CARD AND KEEP IN A

SECURE AREA. THIS IS FOR YOUR SECURITY.

D1-4-2-6-1_En

Information to User

Alteration or modifications carried out without

appropriate authorization may invalidate the user's

right to operate the equipment.

D8-10-2_En

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the

plug by tugging the cord and never touch the power

cord when your hands are wet as this could cause a

short circuit or electric shock. Do not place the unit, a

piece of furniture, etc., on the power cord, or pinch the

cord. Never make a knot in the cord or tie it with other

cords. The power cords should be routed such that they

are not likely to be stepped on. A damaged power cord

can cause a fire or give you an electrical shock. Check

the power cord once in a while. When you find it

damaged, ask your nearest PIONEER authorized

service center or your dealer for a replacement.

S002_En

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished

reading the instructions, put them away in a safe place for future reference.

In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory

drawings. However the method of connecting and operating the unit is the same.

K015 En

CAUTION: This product satisfies FCC regulations

when shielded cables and connectors are used to

connect the unit to other equipment. To prevent

electromagnetic interference with electric appliances

such as radios and televisions, use shielded cables

and connectors for connections.

D8-10-3a_En

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

Protect the power cord from being walked on or

pinched

particularly

plugs,

convenience

receptacles, and the point where they exit from the

apparatus.

10)

Only use attachments/accessories specified by the

manufacturer.

Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

Unplug this apparatus during lightning storms or

when unused for long periods of time.

Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

P1-4-2-2_En

11)

12)

13)

14)

CAUTION

This product is a class 1 laser product, but this

product contains a laser diode higher than Class 1.

To ensure continued safety, do not remove any covers

or attempt to gain access to the inside of the product.

Refer all servicing to qualified personnel.

The following caution label appears on your unit.

Location: Inside of the player

CLASS 1

LASER PRODUCT

APPAREIL Á LASER

DE CLASSE 1

D3-4-2-1-8_B_En

CAUTION

ATTENTION

CLASS 3B INVISIBLE LASER RADIATION

WHEN OPEN, AVOID EXPOSURE TO BEAM.

RADIATIONS LASER INVISIBLES DE CLASSE 3B QUAND

OUVERT. ÉVITEZ TOUT EXPOSITIONAU FAISCEAU.

ADVARSEL

KLASSE 3B USYNLIG LASERSTRÅLING VED ÅBNING.

UNDGÅ UDSÆTTELSE FOR STRÅLING.

VARNING

KLASS 3B OSYNLIG LASERSTRÅLNING NÄR DENNADEL

ÄR ÖPPNAD. UNDVIK ATT UTSÄTTADIG FÖR STRÅLEN.

VARO!

AVATTAESSA OLET ALTTIINA NÄKYMÄTTÖMÄLLE

LUOKAN 3B LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.

PRECAUCIAÓN CUANDOSEABREHAYRADIACIÓN LÁSER DE CLASE 3B

INVISIBLE. EVITE LA EXPOSICIÓN A LOS RAYOS LÁSER.

VORSICHT

BEI GEÖFFNETERABDECKUNG IST UNSICHTBARE LASERSTRAHLUNG

DER KLASSE 3B IM GERÄTEINNEREN VORHANDEN. NICHT DEM

LASERSTRAHLAUSSETZEN!

DRW2308-A

CAUTION

The POWER switch on this unit will not completely

shut off all power from the AC outlet. Since the

power cord serves as the main disconnect device for

the unit, you will need to unplug it from the AC outlet

to shut down all power. Therefore, make sure the

unit has been installed so that the power cord can

be easily unplugged from the AC outlet in case of an

accident. To avoid fire hazard, the power cord should

also be unplugged from the AC outlet when left

unused for a long period of time (for example, when

on vacation).

D3-4-2-2-2a_A_En

VENTILATION CAUTION

When installing this unit, make sure to leave space

around the unit for ventilation to improve heat

radiation (at least 5 cm at rear, and 3 cm at each

side).

WARNING

Slots and openings in the cabinet are provided for

ventilation to ensure reliable operation of the

product, and to protect it from overheating. To

prevent fire hazard, the openings should never be

blocked or covered with items (such as newspapers,

table-cloths, curtains) or by operating the

equipment on thick carpet or a bed.

D3-4-2-1-7b_A_En

WARNING

To prevent a fire hazard, do not place any naked

flame sources (such as a lighted candle) on the

equipment.

D3-4-2-1-7a_A_En

S001_En

Selecting fine audio equipment such as the unit

you've just purchased is only the start of your

musical enjoyment. Now it's time to consider how

you can maximize the fun and excitement your

equipment offers. This manufacturer and the

Electronic Industries Association's Consumer

Electronics Group want you to get the most out of

your equipment by playing it at a safe level. One that

lets the sound come through loud and clear without

annoying blaring or distortion-and, most importantly,

without affecting your sensitive hearing.

Sound can be deceiving. Over time your hearing

"comfort level" adapts to higher volumes of sound.

So what sounds "normal" can actually be loud and

harmful to your hearing. Guard against this by

setting your equipment at a safe level BEFORE your

hearing adapts.

To establish a safe level:

· Start your volume control at a low setting.

· Slowly increase the sound until you can hear it

comfortably and clearly, and without distortion.

Once you have established a comfortable sound

level:

· Set the dial and leave it there.

Taking a minute to do this now will help to prevent

hearing damage or loss in the future. After all, we

want you listening for a lifetime.

We Want You Listening For A Lifetime

Used wisely, your new sound equipment will

provide a lifetime of fun and enjoyment. Since

hearing damage from loud noise is often

undetectable until it is too late, this manufacturer

and the Electronic Industries Association's

Consumer Electronics Group recommend you avoid

prolonged exposure to excessive noise. This list of

sound levels is included for your protection.

Decibel

Level Example

Quiet library, soft whispers

Living room, refrigerator, bedroom away from traffic

Light traffic, normal conversation, quiet office

Air conditioner at 20 feet, sewing machine

Vacuum cleaner, hair dryer, noisy restaurant

Average city traffic, garbage disposals, alarm clock

at two feet.

THE FOLLOWING NOISES CAN BE DANGEROUS

UNDER CONSTANT EXPOSURE

Subway, motorcycle, truck traffic, lawn mower

100

Garbage truck, chain saw, pneumatic drill

120

Rock band concert in front of speakers,

thunderclap

140

Gunshot blast, jet plane

180

Rocket launching pad

Information courtesy of the Deafness Research Foundation.

If the AC plug of this unit does not match the AC

outlet you want to use, the plug must be removed

and appropriate one fitted. Replacement and

mounting of an AC plug on the power supply cord of

this unit should be performed only by qualified

service personnel. If connected to an AC outlet, the

cut-off plug can cause severe electrical shock. Make

sure it is properly disposed of after removal.

The equipment should be disconnected by removing

the mains plug from the wall socket when left

unused for a long period of time (for example, when

on vacation).

D3-4-2-2-1a_A_En

Operating Environment

Operating environment temperature and humidity:

+5 ºC to +35 ºC (+41 ºF to +95 ºF); less than 85 %RH

(cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in

locations exposed to high humidity or direct sunlight (or

strong artificial light)

D3-4-2-1-7c_A_En

FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Product Name:

COMPACT DISC PLAYER

Model Number:

CDJ-400

Responsible Party Name: PIONEER ELECTRONICS SERVICE, INC.

Address:

1925 E. DOMINGUEZ ST. LONG BEACH, CA 90801-1760, U.S.A.

Phone:

1-800-421-1404

BEFORE OPERATING (FEATURES)

FEATURES

Designed for professional use by DJs, the CDJ-400 compact

disc player provides all the functions and performance re-

quired in disco clubs while offering performance, sound qua-

lity and functionality superior to analog players.

SCRATCH JOG EFFECT

Equipped with Scratch Jog Effect for new scratch sounds.

Equipped with three buttons [BUBBLE], [TRANS] and [WAH]

for new scratch sounds. Effects that are different from the nor-

mal scratch sound can be obtained, broadening the possibili-

ties of your DJ play.

DIGITAL JOG BREAK

Equipped with Digital Jog Break for original sound effects.

Individual remix assist functions [JET], [ROLL] and [WAH]

have been provided individually in three buttons. By choosing

a function and operating the jog dial in time with the music, a

new remix world can be experienced.

JOG DIAL

The large 115 mm diameter jog dial enables better handling

than an analog turntable.

I PITCH BEND

This function changes the music tempo depending on the di-

rection and speed the jog dial is rotated.

I SCRATCH PLAY

In the VINYL mode when the surface of the jog dial is pressed

playback is discontinued and then continues according to the

direction and speed the dial is rotated.

I FRAME SEARCH

Moves the pause position in frame units (1/75 sec) when the

jog dial is rotated in the pause mode.

I SUPER-FAST SEARCH

By turning the jog dial while holding down the manual search

button or the track search button, disc search can be per-

formed faster than normal search or track search functions.

TEMPO CONTROL

100 mm long high-precision slider allowing free speed adjust-

ment.

With a digital display calibrated in 0.02 % units (within a ±6 %

range), tempo adjustments can be made more easily and ac-

curately.

I TEMPO CONTROL RANGE

The maximum variable range can be set to four variable

ranges; ±6 %, ±10 %, ±16 %, WIDE, to provide easier operation

environment.

I MASTER TEMPO

Maintains the same pitch of sound while changing the music

tempo.

REVERSE PLAY

When the reverse button (DIRECTION REV) is pressed so that

the button's indicator lamp lights, play is performed in the re-

verse direction.

CUE

I BACK CUE

After storing cue points in memory, press the CUE button

while playing a track to return and start from the stored cue

point.

I AUTO CUE

Skips the non-recorded part at the top of a track and automati-

cally enters stand-by mode at the track's starting point, allow-

ing playback to begin instantly when the PLAY/PAUSE button

(

6) is pressed.

I CUE POINT SAMPLER

Playback can be started at one touch from a stored cue point,

convenient for confirming start points and as sampler.

CUE/LOOP MEMORY

This player is equipped with an internal memory that permits

the recording of cue point or loop point; the recorded points

can later be recalled as desired.

REAL TIME SEAMLESS LOOP

This function simplifies the setting and canceling of loops.

The loop can be set at the very instant the track is being

played. By setting a loop just before the end of the track, the

track can be made so that it doesn't stop. In addition, an

ADJUST mode has been added to enable one-touch adjust-

ments to the loop-out point, thereby facilitating the loop op-

eration.

RELOOP

Allows returning to the set loop position any number of times.

Press the RELOOP/EXIT button after canceling loop play to

return to the loop start position. By using the loop ON and OFF

combined with the rhythm of the track, new sound effects can

be created.

BEAT LOOP/LOOP DIVIDE

Automatically sets a loop-out point according to the track's

BPM and starts loop-play. Each additional time the button is

pressed, the loop is divided and a new rhythm produced.

PLAYING ADDRESS

The bar graph provides a visual reference of the track play-

back progress that enables the user to visualize the current

playback position, in the same way as is done with an analog

record by checking the position of the needle. The current po-

sition can be confirmed by the length of the graph, and in ad-

dition, the graph flashes to notify the ending of the track.

FADER START

When a Pioneer DJ mixer (sold separately) is connected, the

mixer's fader operation can be used to perform quick start

and back cue.

RELAY PLAY

Two CDJ-400 units can be connected in tandem to perform

automatic relay play.

When track playback stops on one of the players, the standby

mode of the other player is released and playback begins au-

tomatically.

BEFORE OPERATING (FEATURES)

CONTENTS

BEFORE OPERATING

FEATURES ................................................................... 4

DISCS USABLE WITH THIS UNIT .............................. 6

CAUTIONS REGARDING HANDLING ........................ 8

CONNECTIONS ............................................................ 9

PANEL FACILITIES .................................................... 11

OPERATIONS

DISC LOADING/UNLOADING ................................... 14

DJ PLAYER OPERATIONS ........................................ 15

Auto cue function ................................................ 15

Starting playback ................................................. 15

Resume function .................................................. 15

To stop playback .................................................. 15

To temporarily interrupt playback ..................... 15

Jog dial functions ................................................ 16

Fast-forward/fast-reverse ................................... 16

Track cueing ......................................................... 16

Rotary seach ........................................................ 16

Change playback speed ...................................... 17

Applying master tempo ...................................... 17

Scratch Jog Effect ............................................... 17

Digital Jog Break ................................................. 17

Cue point settings ............................................... 18

Mixing different tracks ........................................ 18

ADVANCED OPERATIONS ....................................... 19

Loop playback ...................................................... 19

Fader start playback ............................................ 19

Scratch play ......................................................... 19

Spin play ............................................................... 19

Reverse play ......................................................... 19

Cue point/loop point memory ............................ 20

Relay play using two players ............................. 20

Writing and reading data .................................... 20

MIDI SETTING ............................................................ 21

OTHER

TROUBLESHOOTING ................................................ 22

SPECIFICATIONS ....................................................... 23

OIL DAMPER FLOAT

OIL DAMPER FLOAT construction helps resist shakes and im-

pacts.

This unit features an OIL DAMPER FLOAT design, making it

harder for distortions and sound breakup to occur due to im-

pacts from operation and vibrations from the floor.

MULTI READ

Supports playback of CD-R and CD-RW discs. (Some discs

may not replay properly, however, due to certain special

characteristics of some discs and recorders, as well as due to

dirty or damaged discs.)

MP3 DJ PLAY

MP3 files recorded on CD-ROM or USB memory device can be

played with DJ functions.

PC CONNECTION

Virtually all the button and slider functions of the CDJ-400 can

be output to external devices.

These signals can then be used to control Pioneer's own DJ

software "DJS" as well as other computer software applica-

tions. In addition, music tracks played on the computer can be

output as audio from the CDJ-400.

Reviews

There are no reviews of this manual yet.

Related Products

Cover page of PIONEER CDXFM128 Owner's Manual

PIONEER CDJ-400/KUCXJ Owner's Manual

Manual details

We guarantee that...

Sample pages

Reviews

Related Products

PIONEER CDXFM128 Owner's Manual

PIONEER DVH-P6050UB/XN/CN5 Owner's Manual

PIONEER SX-SW560/KUCXCN Service Manual

PIONEER PL-300 Service Manual

PIONEER CT-W502R Service Manual

Popular Brands

General

Members Area