<DRB1365>
5
ChK/En
CAUTIONS REGARDING
HANDLING
Location
Install the player in a well-ventilated location where it will not be
exposed to high temperatures or humidity.
Do not install the player in a location which is exposed to direct sunlight,
or near stoves or radiators. Excessive heat can adversely affect the
cabinet and internal components. Installation of the player in a damp or
dusty environment may aiso result in a malfunction and can be
hazardous. Avoid installation near cookers etc., where the player may be
exposed to oily smoke, steam or heat.
Installation guidelines
÷ Placing and using the compact disc player for long periods on heat-
generating sources such as amplifiers or near spotlights, etc. will
affect product performance. Avoid placing the player on heat-
generating sources.
÷ Install this compact disc player as far as possible away from tuners
and TV sets. A compact disc player installed in close proximity to
such equipment may cause noise or degradation of the picture.
÷ Noise may be noticeable when an indoor antenna is used. In such
cases, make use of an outdoor antenna or turn off power to the
compact disc player.
÷ When the unit is used in a loud-sound environment, e.g., near a
speaker, sound skip may occur. Install the unit away from the
speaker or reduce the listening volume.
÷ Place this unit on a level surface and a stable platform.
÷ Be sure the player, including its audio and power supply cords, does
not touch vibrating materials. Any cause of vibration other than the
insulators may cause the disc to skip. Take special care when using
the player while it is installed in a carrying case.
Read before use
Installing the CMX-3000 in an EIA rack
The screw holes on the front panel o the CMX-3000 are designed for
use in attaching the unit to a 19-inch EIA rack.
÷ Remove the five legs on the unit before installing the unit in the rack.
÷ Attach the unit to the rack using screws of the appropriate size
(screws not provided with the unit).
Note
÷ Never place this CD player directly above a power amplifier, as the
heat given off by the amplifier might result in damage to the unit.
Placing the CD player directly above a power amplifier might also
result in ham radio signals being picked up or in other types of
interference.
÷ Always be sure to remove the CD player from its rack before
shipping.
÷ When moving the CD player while still installed in its rack, exercise
caution to avoid subjecting the player to shocks or vibration.
Do not place on or against
vibrating materials!
¶
¶
¶
¶
¶
¶
¶
¶
¶
¶
¶
