LCD display
1
3
4
6
2
5
1 Main display section
Shows the various information such as
band, play time, and other setting.
! Tuner
Band and frequency are displayed.
! Built-in CD Player
Erapsed play time is displayed.
! Audio and initial setup
Function names and setup status are dis-
played.
2 Preset number/track number indicator
Shows the track number or preset number.
! If a track number 100 or more is selected,
d on the left of the track number indica-
tor will light.
3 RPT indicator
Shows when repeat play is turned on.
4 LOUD indicator
Appears in the display when loudness is
turned on.
5 Stereo (5) indicator
Shows when the selected frequency is
being broadcast in stereo.
6 LOC indicator
Shows when local seek tuning is on.
Basic Operations
Turning the unit on and
selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in the unit (refer to the next page).
% Press SOURCE to select a source.
Press
SOURCE repeatedly to switch between
the following sources:
Tuner
--Built-in CD player--AUX
Notes
! In the following cases, the sound source will
not change:
-- When there is no disc in the unit.
-- When the AUX (auxiliary input) is set to off
(refer to page 9).
! AUX is set to on by default. Turn off the AUX
when not in use (refer to Switching the auxili-
ary setting on page 9).
! When this unit's blue/white lead is connected
to the vehicle
's auto-antenna relay control
terminal, the vehicle
's antenna extends when
this unit
's source is turned on. To retract the
antenna, turn the source off.
Adjusting the volume
% Use VOLUME to adjust the sound level.
Turning the unit off
% Press SOURCE and hold until the unit
turns off.
Tuner
Listening to the radio
Important
If you are using this unit in North, Central or
South America, reset the AM tuning step (see
Setting the AM tuning step on page 9).
1
Press SOURCE to select the tuner.
2
Press BAND to select a band.
Press
BAND until the desired band (F1, F2, F3
for FM or
AM) is displayed.
3
To perform manual tuning, briefly press
c or d.
Operating this unit
En
5
English
Section
02