DV-434
2
7 CONTRAST TABLE for DV-434/KUXJ
DV-434/KUXJ and DV-333/KUXJ are constructed the same except for the following:
PCB ASSEMBLIES
P5 - 1
DVDM Assy
VWS1412
VWS1432
FLJB Assy
VWM1991
VWM2049
P5 - 4
FLJB Assy
VWV1748
VWV1780
P5 - 2
NSP
PWSB Assy
VWG2174
VWG2243
PACKING
P3 - 4
Remote Control Unit
VXX2702
VXX2703
P3 - 9
Packing Case
VHG1901
VHG1924
P3 -13
Operating Instructions (English)
VRB1244
VRB1252
EXTERIOR
P5 -12
Rear Panel
VNA2161
VNA2183
P5 -17
Front Panel Assy
VXA2391
VXA2399
P5 -19
NSP
Pop Label
VRW1830
VRW1833
NSP
Pop Label
Not used
VRW1845
For Front Panel
Ref.
No.
Remarks
DV-333/KUXJ
DV-434/KUXJ
Part No.
Mark
Symbol and Description
1. CONTRAST OF MISCELLANEOUS PARTS
· For PCB assemblies, Refer to "CONTRAST OF PCB ASSEMBLIES" and "2. SCHEMATIC DIAGRAM".
NOTES :
÷ Parts marked by " NSP " are generally unavailable because they are not in our Master Spare Parts List.
÷ The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
÷ Reference Nos. indicate the pages and Nos. in the service manual for the base model.
÷ When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex. 1
When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by
J = 5%, and K = 10%).
560
= 56 × 101= 561 ................................................... RD1/4PU 5 6 1 J
47k
= 47 × 10 3 = 473 .................................................. RD1/4PU 4 7 3 J
0.5
= R50 ...................................................................... RN2H Â 5 0 K
1
= 1R0 ......................................................................... RS1P 1 Â 0 K
Ex. 2
When there are 3 effective digits (such as in high precision metal film resistors).
5.62k
= 562 × 10 1 = 5621 ........................................... RN1/4PC 5 6 2 1 F