DV-505
2
CONTRAST OF MISCELLANEOUS PARTS
EXPLODED VIEWS
7 CONTRAST TABLE
DV-505/KU/RD and KU are constructed the same except for the following:
PCB ASSEMBLIES
FLKY ASSY
VWM1789
VWM1881
P5 1
FLKB ASSY
VWG1873
VWG2008
1
PACKING
P3 3
Warranty Card
ARY1044
Not used
Label (Region)
Not used
VRW1705
2, No.1
BOTTOM VIEW SECTION
Label (Region)
Not used
VRW1704
2, No.2
Ref.
No.
Remarks
KU type
KU/RD type
Part No.
Mark
Symbol and Description
NOTES :
÷ Parts marked by " NSP " are generally unavailable because they are not in our Master Spare Parts List.
÷ The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
÷ Reference Nos. indicate the pages and Nos. in the service manual for the base model.
÷ When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex. 1
When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by
J = 5%, and K = 10%).
560
= 56 × 101= 561 ................................................... RD1/4PU 5 6 1 J
47k
= 47 × 10 3 = 473 .................................................. RD1/4PU 4 7 3 J
0.5
= R50 ...................................................................... RN2H Â 5 0 K
1
= 1R0 ......................................................................... RS1P 1 Â 0 K
Ex. 2
When there are 3 effective digits (such as in high precision metal film resistors).
5.62k
= 562 × 10 1 = 5621 ........................................... RN1/4PC 5 6 2 1 F
1 Refer to " CONTRAST OF PCB ASSEMBLIES " .
2 The numbers in the remarks column correspond to the numbers on the " EXPLODED VIEWS ".
Protector B
Protector A
Packing Case
No.1
No.1
Rear Panel
No.2
÷ PACKING
÷ BOTTOM VIEW SECTION
