PIONEER DVR-A09XLC/KBXV Owner's Manual

PIONEER DVR-A09XLC/KBXV Owner's Manual
0 Rating(s)
Read reviews

Owner's Manual for PIONEER DVR-A09XLC/KBXV, downloadable as a PDF file.

Manual details

Immediate download after payment.
Delivered as a PDF file.
The manual has 8 pages
File size: 0.23 MB
Available language versions: English
Different language versions may vary sligthly in file size and page count.

We guarantee that...

our manuals are complete,
our manuals are checked with antivirus,
We'll issue refund if the manual is damaged, incomplete or unreadable (our refund policy)

Sample pages

- 1 -

DVD / CD WRITER

DVR-A09

Operating instructions

XLA

XLB

XLC

Thank you for buying this Pioneer product. Please read through these operating instructions

so you will know how to operate your unit properly. After you have finished reading the

instructions, put them away in a safe place for future reference.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

"dangerous voltage" within the product's

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

CAUTION:

TO PREVENT THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT

D3-4-2-1-1_En-A

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

D8-10-1-2_En

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.

D8-10-1-3_EF

Information to User

Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate

the equipment.

D8-10-2_En

is a trademark of DVD Format/Logo Corporation.

- 1 -

DVD / CD WRITER

DVR-A09

Operating instructions

XLA

XLB

XLC

Thank you for buying this Pioneer product. Please read through these operating instructions

so you will know how to operate your unit properly. After you have finished reading the

instructions, put them away in a safe place for future reference.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

"dangerous voltage" within the product's

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

CAUTION:

TO PREVENT THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT

D3-4-2-1-1_En-A

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

D8-10-1-2_En

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.

D8-10-1-3_EF

Information to User

Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate

the equipment.

D8-10-2_En

is a trademark of DVD Format/Logo Corporation.

- 2 -

This product complies with the EMC Directives

(89/336/EEC, amended by 92/31/EEC and

93/68/EEC).

D3-4-2-1-9b_En

CAUTION

This product is a class 1 laser product, but this

product contains a laser diode higher than Class 1.

To ensure continued safety, do not remove any covers

or attempt to gain access to the inside of the product.

Refer all servicing to qualified personnel.

The following caution label appears on your unit.

Location: on top of the cover

D3-4-2-1-8_A_En

CAUTION

ATTENTION

CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION

WHEN OPEN, AVOID EXPOSURE TO THE BEAM.

DRW2247 - A

RADIATIONS LASER VISIBLES ET INVISIBLES DE CLASSE 3B

QUAND OUVERT. ÉVITEZ TOUT EXPOSITION AU FAISCEAU.

ADVARSEL KLASSE3BSYNLIGOGUSYNLIGLASERSTRÅLINGVEDÅBNING.

UNDGÅ UDSÆTTELSE FOR STRÅLING.

VARNING KLASS 3B SYNLIGOCHOSYNLIGLASERSTRÅLNINGNÄRDENNA

DEL ÄR ÖPPNAD. UNDVIK ATT UTSÄTTA DIG FÖR STRÅLEN.

VARO!

AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA

NÄKYMÄTTÖMÄLLE LUOKAN 3B LASERSÄTEILYLLE.

ÄLÄ KATSO SÄTEESEEN.

PRECAUCIAÓN CUANDOSEABREHAYRADIACIÓNLÁSERDECLASE3BVISIBLE

E INVISIBLE. EVITE LA EXPOSICIÓN A LOS RAYOS LÁSER.

VORSICHT BEIGEÖFFNETERABDECKUNGISTSICHTBAREUNDUNSICHTBARE

LASERSTRAHLUNG DER KLASSE 3B IM GERÄTEINNEREN

VORHANDEN. AUGEN NICHT DEM LASERSTRAHLAUSSETZEN!

WARNING

This equipment is not waterproof. To prevent a fire

or shock hazard, do not place any container filed

with liquid near this equipment (such as a vase or

flower pot) or expose it to dripping, splashing, rain

or moisture.

D3-4-2-1-3_A_En

WARNING: Handling the cord on this product or

cords associated with accessories sold with the

product will expose you to lead, a chemical known to

the State of California and other governmental

entities to cause cancer and birth defects or other

reproductive harm.

D36-P4_En

Wash hands after handling

Maschinenlärminformations-Verordnung 3.

GPSGV: Der höchste Schalldruckpegel beträgt

70 dB (A) oder weniger gemäß EN ISO 7779

IMPORTANT NOTICE RECORD THE MODEL NUMBER AND SERIAL NUMBERS OF THIS EQUIPMENT BELOW.

THE NUMBERS ARE ON THE REAR.

MODEL NO.

SERIAL NO.

KEEP THESE NUMBERS FOR FUTURE USE.

D1-4-2-6-2_En

DVR-A09XLA, DVR-A09XLB, DVR-A09XLC

DANGER VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT

EXPOSURE TO BEAM.

CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION : THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD. D6-8-2-1_En

Machine Noise Information Regulation 3.

GPSGV: The highest sound-pressure level is 70 dB

(A) or less in accordance EN ISO 7779.

- 3 -

SAFETY INSTRUCTIONS

To ensure your personal safety and to maximize the full operating potential of your Drive, read and follow

these safety precautions:

ENVIRONMENT - Please do not use the unit at places with much dust, high temperature, or high humidity.

Please use the unit at a place where it is not subjected to vibrations or shocks.

POWER - Turn off your system and attached hardware devices before installation.

READ INSTRUCTIONS - Read all safety and operating instructions before the Drive is operated.

RETAIN INSTRUCTIONS - Retain the safety and operating instructions for future reference.

FOLLOW INSTRUCTIONS - Follow all operating and use instructions.

HEED WARNINGS - All warnings must be adhered to.

CLEANING - DO NOT use liquid, aerosol cleaners, or alcohol. Use only a damp cloth to clean the exterior

housing.

WATER AND MOISTURE - DO NOT use this product near water.

POWER SOURCES - Operate this product from the type of power source indicated on the marking label. If you

are not sure of the type of power available, consult Authorized Pioneer Dealer.

OVERLOADING - DO NOT overload wall outlets and extension cords. Doing so can result in fire or electric

shock.

OBJECT AND LIQUID ENTRY - Never push objects of any kind into this product. Touching dangerous voltage

points may cause a short resulting in fire or electric shock. Do not spill liquid of any kind on this product.

CONDENSATION - Moisture will form in the operating section of the product causing performance to be

impaired if it is brought from cool surroundings into a warmer environment. If you are moving the unit to a

location with a warmer temperature, let the product stand for 1-2 hours in the new location before turning it

back on.

SERVICING - Do not attempt to repair this product yourself. Opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to qualified service personnel. (Refer to the enclosed

Service and Support Card.)

÷ Remove dust or lint from the disc with a soft cloth by

wiping from the inside to the outside edge rather than in

a circular motion.

÷ Do not use record-cleaning or anti-static agents as the

solutions may cause damage to a disc.

Always be sure to store your discs in proper DVD-R storage

cases when not in use, and always be sure to check for dirt

or dust on discs (especially on the recording side) before use.

÷ Avoid touching or scratching the signal surface (shiny

side) of the disc.

÷ Hold the disc by the edges or by the center hold and one

edge.

÷ Do not affix paper or labels to the disc.

÷ Discard warped or cracked discs as they may cause

damage to the drive.

÷ Avoid specially shaped discs such as hearts or polygons.

ABOUT REGION CODES

The region code can be changed ONLY 5 times, including the 1st setting. Please be aware the

5th change will be PERMANENT, therefore, please pay attention when changing region codes.

÷ Region codes are part of the DVD Standard. However, Region codes on DVD discs are

optional. DVD discs with no specified Region code can be played on all players.

- 4 -

FEATURES

· Maximum Write Speed ( v : ZCLV, 5 : CAV )

DVD-R

1X, 2X, 4X, 6X, 8X5, 12X5, 16X5

Dual Layer DVD-R

2X, 4X, 6X

DVD-RW

1X, 2X, 4X, 6X

DVD+R

2.4X, 4X, 6X, 8X5, 12X5, 16X5

Double Layer DVD+R

2.4X, 4X, 6X

DVD+RW

2.4X, 4X, 6X, 8Xv

CD-R

4X, 10X, 16X, 32X5, 40X5

CD-RW

4X, 10X, 16X, 20Xv, 24Xv

· Maximum Read Speed

DVD-ROM (single)

16X

DVD-ROM (dual)

12X

DVD-R, DVD+R

12X

Dual Layer DVD-R

Double Layer DVD+R

DVD-RW, DVD+RW

DVD-RAM

CD-ROM, CD-R

40X

CD-RW

32X

· Buffer Memory Size : 2 MBytes (Write, Read)

· IDE Data Transfer Mode :

PIO Mode 4/Multi Word DMA Mode 2/Ultra DMA Mode 4

· 5.25inch Half-Height built in type

· Stereo Audio Output

· LCD Tilt Servo Mechanism

· Horizontal/Vertical orientation available

· Low vibration Mechanism by DRA system

Disc Format (Read/Write)

· DVD single layer/dual layer /120 mm disc /80 mm disc

· DVD-R (In case of write, 650nm disc for General only.)

· DVD-R (4X, 8X,16X Write Speed)

· Dual Layer DVD-R

· DVD-RW (1X, 2X, 4X, 6X Write Speed)

· DVD+R (2.4X, 4X, 8X, 16X Write Speed)

· Double Layer DVD+R

· DVD+RW (2.4X, 4X, 8X Write Speed)

· DVD-RAM (non-cartridge, Version 2.0, Version 2.1) (Read only)

· CD-ROM Mode 1

· CD-ROM XA Mode2 (form 1, form2)

· Photo CD (single and multiple session)

· CD-DA

· CD-Extra (CD PLUS)

· Video CD

· CD Text

· CD-R

· CD-RW, High-Speed CD-RW, Ultra-Speed CD-RW

Note:

· Specific application program(s) that support above format(s) required.

· Supported media required for specific DVD & CD writing speeds.

· To perform DVD writing at 12x or 16x speeds, use Pioneer-designate disc media. For details,

consult information available on Pioneer's website.

- 5 -

INTERFACE

FRONT VIEW

1 Forced Ejection Hole

Insert a stiff rod into the hole and push to

eject the tray when the tray doesn't unload

by pressing the Eject button. In the normal

operation, the eject button should be used

to unload the tray. Make sure the power of

the drive is turned off and wait more than

one minute till the disc rotation is stopped

when access the eject hole.

2 BUSY Indicator

Operation status is indicated as follows.

During reading

Lights

During writing

Lights

3 Eject Button (

To unload /load the disc, press the button.

4 Disc Tray

Open the loading tray by pressing the eject

button, then place a CD or DVD disc into

the slit with the label facing up.

Press the eject button or push the front part

of tray to load the tray with the disc.

Do not attempt to pull out the disc tray

forcibly.

Name

Function

Left channel audio output.

Ground.

Right channel audio output.

Name

Function

1MA

on The drive is used in master mode.

2SL

on The drive is used in slave mode.

3CS

on Using Cable Select function.

Reserved.

5 Audio Output

This is a connector for output of analog audio.

This connector is compatible with `Molex

70553'.

Choose a suitable connection cable.

Name

Function

+12

Power supply input for DC +12 V.

Ground.

4+5

Power supply input for DC +5 V.

6 Device Configuration Jumper

Switch goes ON when short socket is put

on.

Make sure the power of the drive is off

before changing jumper setting.

Pin # 1 is ON as the factory default.

7 Host IDE Interface

This is a 40 pin I/O connector according to

the ATA specifications. Use an 80-wire

cable for maximum writing speed.

8 DC Input

REAR VIEW

Precautions on playing 8 cm (3.15") Discs

An 8 cm (3.15") disc cannot be played even an

adapter is attached to the disc when the drive

is upright condition.

Reviews

There are no reviews of this manual yet.

Related Products

Cover page of PIONEER PDP-42WE2 Owner's Manual

PIONEER DVR-A09XLC/KBXV Owner's Manual

Manual details

We guarantee that...

Sample pages

Reviews

Related Products

PIONEER PDP-42WE2 Owner's Manual

PIONEER PDK-TS10/WL5 Service Manual

PIONEER VSX-LX60/HYXJ5 Service Manual

PIONEER VSX-LX60/HYXJ5 Owner's Manual

PIONEER S-FCR4700 Service Manual

Popular Brands

General

Members Area