3
En
English
Español
Português
LINE VOLTAGE SELECTOR SWITCH
Main voltages in Saudi Arabia are 127 V and 220 V
only. Never use this model with 110 V setting in Saudi
Arabia.
The line voltage selector switch is on the rear panel. Check
that it is set properly before plugging the power cord into
the AC wall socket. If the voltage is not properly set or if
you move to an area where the voltage requirements dif-
fer, adjust the selector switch as follows.
1. Use a medium-size screwdriver.
2. Insert the screwdriver into the groove on the voltage
selector, and adjust so that the tip of the arrow points
to the voltage value of your area.
Set the voltage selector for the voltage in your area.
120V127V
220V
240V
110V
VOLTAGE SELECTOR
CONTENTS
REAR PANEL FACILITIES ........................... 4
SYSTEM CONNECTIONS I ......................... 5
SYSTEM CONNECTIONS II ........................ 6
FRONT PANEL FACILITIES ......................... 7
USING THE EQUALIZER CONTROLS ....... 8
INDIVIDUAL OPERATIONS ...................... 10
TROUBLESHOOTING ............................... 12
SPECIFICATIONS ...................................... 12
Thank you for buying this Pioneer product.
Please read through these operating instructions so you
will know how to operate your unit properly. After you
have finished reading the instructions, keep them in a safe
place for future reference.
In some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown
in the explanatory drawings. However, the method of con-
necting and operating the unit is the same.
