S-IS22
2
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The woofer is attached to the inner baffle by 4 external screws.
To detach it, first remove the cosmetic baffle assy. To detach
the cosmetic baffle assy, pry it open by inserting a flat blade
screwdriver into the lower slot of it.
To detach the woofer, carefully disconnect the wires of the
woofer mounted on the network assy.
To attach the woofer, face its terminal downward and fit the
boss of the frame to the hole on the inner baffle, then fasten
those screws.
The mid-range is attached to the inner baffle by 2 external
screws.
To detach it, first remove the cosmetic baffle assy. To detach
the cosmetic baffle assy, pry it open by inserting a flat blade
screwdriver into the lower slot of it.
To detach the mid-range, carefully disconnect the wires of the
mid-range mounted on the network assy.
To attach the mid-range, face its terminal upward and fit the
boss of the frame to the hole on the inner baffle, then fasten
those screws.
The tweeter is attached to the inner baffle by press-fitting.
To detach it, first remove the cosmetic baffle assy. To detach
the cosmetic baffle assy, pry it open by inserting a flat blade
screwdriver into the lower slot of it.
To exchange the tweeter, do it with the network assy.
To attach the tweeter, replace it on the inner baffle and stick the
tape to the lead wire on the slot of the inner baffle.
(Woofer)
(Mid-Range)
(Tweeter)
The input terminal is attached to the back board of the cabinet
by press-fitting.
To detach the input terminal, pry it open by inserting a flat
blade screwdriver into the upper and lower slot of the input ter-
minal.
To attach the input terminal, replace it on the back board of the
cabinet correctly by press-fitting. (The red terminal is right
side.)
The network assy is attached between the loudspeakers and the
input terminal.
To detach it, first remove the cosmetic baffle assy. To detach
the cosmetic baffle assy, pry it open by inserting a flat blade
screwdriver into the lower slot of it. Then remove the woofer
and the mid-range speaker. To detach the each speaker, care-
fully disconnect the wires of the each speaker mounted on the
network assy.
To detach the network assy, carefully disconnect the wires to
the input terminal.
To attach the network assy, replace it in the cabinet correctly.
The cosmetic baffle assy is attached to the inner baffle of the
cabinet by press-fitting.
To detach the cosmetic baffle assy, pry it open by inserting a
flat blade screwdriver into the lower slot of it.
To attach the cosmetic baffle assy, replace it on the inner baffle
of the cabinet by press-fitting.
(Input Terminal)
(Network Assy)
(Cosmetic Baffle Assy)
