En
Operating Environment H045 En
Operating environment temperature and humidity:
+5
°C +35°C (+41°F +95°F); less than 85%RH (cooling
vents not blocked)
Do not install in the following locations
· Location exposed to direct sunlight or strong artificial light
· Location exposed to high humidity, or poorly ventilated
location
VENTILATION: When installing this unit, make sure to
leave space around the unit for ventilation to improve heat
radiation (at least 30 cm at top, 15 cm at rear, and 15 cm at
each side).
WARNING: Slot and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the prod-
uct and to protect it from overheating, to prevent fire haz-
ard, the openings should never be blocked and covered with
items, such as newspapers, table-cloths, curtains, etc. Also
do not put the apparatus on the thick carpet, bed, sofa, or
fabric having a thick pile.
TOW VOLTAGE SELECTOR SWITCHS
Only multi-voltage model is provided with these
switches.
Mains voltages in Saudi Arabia are 127 V and
220 V only. Never use this model with the 110 V
setting in Saudi Arabia. H019 En
There are two VOLTAGE SELECTORS. Be sure
both of these are set correctly. Always check that
thease selectors are set properly before plugging the power
cord into the wall outlet.
1. Disconnect the power cord.
2. Use a small-sized screwdriver.
3. Insert the screwdriver into the groove on the voltage se-
lector, and adjust the VOLTAGE SELECTOR.
CAUTION 240 V, 220 240 V
Power source voltage is factory adjusted 240 volts and
220 - 240 volts. If your area is different, change voltage
selectors settings.
H039En
220 - 240 V
220 - 230 V
110 - 127 V
240 V
110 - 127 V
TWO VOLTAGE SELECTORS
