5
1
23
4
1
2
3
4
C
D
F
A
B
E
PDA-H05
No image and no sound
No image and no sound
Is the transmitter connected to the
MR and the receiver to the panel?
Connect the transmitter to the MR
and the receiver to the panel.
No
Yes
Yes
Is the ACT LED of the transmitter
lit?
Replace the transmitter.
No
Yes
Are the PWR (power) LEDs of the
transmitter and receiver lit?
Are the AC adaptors connected to
the transmitter and receiver?
Replace the AC adaptors.
No
Connect the AC adaptors.
No
Yes
Yes
Is the OSE LED of the transmitter
lit?
Are the DVI and MDR cables
properly connected between the
transmitter and the MR?
Replace the transmitter.
No
Connect the DVI and MDR cables.
No
Yes
Yes
Is the OSE LED of the receiver lit?
Are the DVI and MDR cables
properly connected between the
receiver and the panel?
Replace the receiver.
No
Connect the DVI and MDR cables.
No
Yes
Yes
Is the OSD LED of the receiver lit?
Using the dedicated cleaning kit
,
clean the ferrule (tip of the optical
cable) and inside the repeater box
of the receiving side. Connect the
cables again and check if an image
is displayed and the sound is output.
Replace the receiver.
No
After replacing the
receiver, is the OSD
LED of the receiver lit?
Replace the
optical cable.
No
No
Yes
Yes
Replace the transmitter.
Yes
Is the OSD LED of the transmitter
lit?
Connect the MR and the panel
directly, using the 3-meter cable
and check if an image is displayed
and the sound is output. If both are
output, replacement of both the
transmitter and receiver is required.
Using the dedicated cleaning kit
,
clean the ferrule (tip of the optical
cable) and inside the repeater box
of the receiving side. Connect the
cables again and check if an image
is displayed and the sound is output.
No
After replacing the
transmitter, is the OSD
LED of the transmitter lit?
Replace the
optical cable.
No
No
Yes
Is the ACT LED of the receiver lit?
Is the DVI cable properly connected
between the receiver and the panel?
No
Connect the DVI cable.
No
Yes
Yes
Note:
· MR: Media Receiver
· Transmitter, receiver: Transmitting- or receiving-side repeater box, respectively
·
: Repair for servicing
Replace the DVI cable connected
to the receiver. If no image is
displayed after replacing the cable,
replace the receiver.
: Cleaning kit AZE1141