PIONEER PDP-S38 Owner's Manual

PIONEER PDP-S38 Owner's Manual
0 Rating(s)
Read reviews

Owner's Manual for PIONEER PDP-S38, downloadable as a PDF file.

We also have service manual to this model.

Manual details

Immediate download after payment.
Delivered as a PDF file.
The manual has 38 pages
File size: 2.62 MB
Available language versions: French, English, Spanish, Dutch, German, Italian
Different language versions may vary sligthly in file size and page count.

We guarantee that...

our manuals are complete,
our manuals are checked with antivirus,
We'll issue refund if the manual is damaged, incomplete or unreadable (our refund policy)

Sample pages

PDP-S38

Operating Instructions

Mode d'emploi

Bedienungsanleitung

Istruzioni per l'uso

Gebruiksaanwijzing

Manual de instrucciones

Speaker System

Enceintes acoustiques

Lautsprechersystem

Sistema di diffusori

Luidsprekersysteem

Sistema de altavoces

SRD1294A_01-07/En

6/16/05, 5:55 PM

PDP-S38

Operating Instructions

Mode d'emploi

Bedienungsanleitung

Istruzioni per l'uso

Gebruiksaanwijzing

Manual de instrucciones

Speaker System

Enceintes acoustiques

Lautsprechersystem

Sistema di diffusori

Luidsprekersysteem

Sistema de altavoces

SRD1294A_01-07/En

6/16/05, 5:55 PM

English

Thank you for buying this Pioneer product.

Please read through these operating instructions before using

your speaker system so you will know how to make the

most of its performance. After you have finished reading the

instructions, put them away in a safe place for future

reference.

WARNING:

Handling the power cord on this product or cords associated

with accessories sold with the product will expose you to

lead, a chemical known to the State of California and other

governmental entities to cause cancer and birth defects or

other reproductive harm.

Wash hands after handling.

CAUTION

This product is designed exclusively for use with the Pioneer

Plasma Display. For more information on compatibility, please

consult with your nearest Pioneer authorized dealer or service

center.

BEFORE USE

÷ The nominal impedance of this speaker system is 8 ohms.

÷ In order to prevent damage to the speaker system

resulting from input overload, please observe the

following precautions:

÷ Do not supply power to the speaker system in

excess of the maximum permissable input. This can

result in damage or a possible fire hazard.

÷ When connecting or disconnecting pin-plugs, be

sure that amplifier power is OFF.

÷ When using a graphic equalizer to emphasize loud

sounds of a high frequency range, do not use

excessive amplifier volume.

÷ Do not force a low-powered amplifier to produce a

loud volume of sound (the amplifier's harmonic

distortion will be increased, and you may damage

the speaker).

÷ Please handle the speakers with sufficient care, as

the grille net and the cabinet can become damaged

or broken when they are subjected to strong external

impacts.

÷ Placing a CRT computer screen or CRT monitor near to

the speakers may result in interference or color distortion.

If this happens, distance the monitor from the speakers.

Installation

÷ Consult your dealer if you encounter any difficulties

with this installation.

÷ Pioneer is not liable for any damage resulting from

improper installation, improper use, modification, or

natural disasters.

CHECKING THE ACCESSORIES

7 Speaker Cable × 2

7 Speakers Mounting Screw (M5 × 10 mm: Black) × 16

7 Speaker Mounting Bracket

For LEFT-TOP

For LEFT-BOTTOM

For RIGHT-TOP

For RIGHT-BOTTOM

7 Padding Strip × 2

(For Flush mounting)

When speakers are mounted Flush, they are affixed to

the side of the speaker as a buffer.

7 Operating Instructions × 1

There are two ways to mount these speakers,

either Air mount or Flush mount.

7 Air mount

There is a gap of air of about 15 mm between the speakers

and the display.

Speakers

7 Flush mount

The speakers are direct against the display.

Speakers

CAUTION:

÷ Do not place force on the speakers' front panel grille net,

or stick your finger or other object into the front of the

speaker, since you may damage the grille net or speaker

unit itself.

÷ Do not use these speakers with anything other than the

Plasma Display. Doing so may result in damage or fire.

SRD1294A_01-07/En

6/16/05, 5:55 PM

English

MOUNTING THE SPEAKERS TO

YOUR PLASMA DISPLAY

Warning

÷ Attach the Plasma Display to the stand before installing

the speakers. See the Operating Instructions packed

together with the stand for how to assemble the stand.

÷ When mounting the speakers, only use the screws

enclosed. Using any screws other than those enclosed

may cause the speakers to come loose and fall.

÷ When mounting the speakers, be sure to tighten the

screws securely so they will not come loose.

÷ Do not lift up the display by the speakers. A speaker may

come off, so carry the display by holding it by the bottom

and its handle.

÷ If you wish to change from Flush mounting to Air mounting

or vice versa:

Remove the speaker mounting brackets from the

speakers and the display and remount them from the

beginning.

1 Attaching the Speaker Mounting

Brackets to the Speakers

There is a left speaker and a right speaker. When you

are mounting them, check the label on the back to get

them right.

There are top and bottom speaker mounting brackets

for both the left and the right speaker. Attach the

appropriate bracket to the top and the bottom on the

back of the speakers with the enclosed screws. (See

Diagram)

The diagram depicts the mounting of the right

speaker. The left speaker mounts in the same way.

Air mounting

Place the speaker so its terminals (bottom)

are facing you. (Example of right speaker)

Flush mounting

Place the speaker so its terminals (bottom)

are facing you. (Example of right speaker)

2 If mounting the speakers Flush, affix

the padding strip to the side of the

speakers (side that touches the

display).

Use the enclosed padding strips to buffer the speakers

when mounting them Flush. Peel off the protective strip

and affix to the side of the speakers.

(10

)

Where to position the padding strip

Speaker Mounting Brackets

(For RIGHT- BOTTOM)

Screw Holes for Air mounting

(2 on outside)

Screw Holes for Air mounting

(2 on outside)

Speaker Mounting

Brackets

(For RIGHT-TOP)

(The skinny slot is used

for mounting to the top.)

Speaker Mounting Brackets

(For RIGHT-BOTTOM)

Screw Holes for

Flush mounting

(2 on inside)

Screw Holes for

Flush mounting

(2 on inside)

Speaker Mounting

Brackets

(For RIGHT-TOP)

(The skinny slot is

used for mounting to

the top.)

Padding Strip

SRD1294A_01-07/En

6/16/05, 5:55 PM

English

3 Screw an enclosed screw into the

speaker mounting hole (lower of the

two) at the top, back of the display.

Do not tighten it all the way yet. Leave it loose, with

about 5 mm left to tighten.

4 Hang the speaker mounting bracket

on the screw you installed at the top

by passing the wide part over it and

lowering into the slot; screw in the

lower screw temporarily.

After passing the wide part of the hole of the speaker

mounting bracket (top) over the screw, lower the speaker

onto it.

5 Adjust the position of the speaker

and then fix the upper and lower

screws firmly.

6 Tighten the two screws, at the top

and bottom for each speaker (total of

four screws), thus fixing the

speakers to the display.

Speaker Mounting Hole

Top, Back of

Display

Leave a space of about 5 mm

Top of Display

5 mm

Tighten the bottom

speaker mounting

bracket to the display

temporarily (one place

bottom).

After passing the

wide part of the hole

over the screw,

lower the speaker.

SRD1294A_01-07/En

6/16/05, 5:55 PM

English

SYSTEM

CABLE

WHITE

BLACK

CONNECTION TO A PLASMA DISPLAY

CONNECTING THE SPEAKERS

1 Pass the speaker cables through the hole in the speaker mounting bracket.

2 Connect the speaker cables to the speaker.

3 Press the speaker cables into the groove of the bracket.

4 Connect the speaker cables to the display.

Connecting your Speaker Cables

(to the speaker)

Groove

Speaker Terminal

Speaker Cable

Connecting your Speaker Cables

(to the display)

Connect the cables correctly with respect to the

polarity of the Plasma Display and the speaker

terminals, that is,

ª cable to ª terminals and ·

cable to

· terminals. To do so, connect the cable

with the gray line to the

ª terminals and the white

cable to the

· terminals.

÷ Press the lever and insert the

end of the cable.

÷ When you release the lever,

it clamps onto the speaker

cable.

Gray Line

Push the lever, insert the end of the speaker cable

into the hole, and release the lever.

Pay attention to the polarity of the speaker terminals

when making connections. (The gray line represents

the

ª terminal)

White

Gray Line White White Gray Line

Warning

If you insert the speaker cable too far so that

the insulation is touching the speaker

terminal, you may not get any sound.

(black)

(red)

SRD1294A_01-07/En

6/16/05, 5:55 PM

Reviews

There are no reviews of this manual yet.

Related Products

PIONEER DEH-1770 Owner's Manual

This manual has 42 pages, file size: 0.55 MB. It's available in languages: Portuguese, English, Spanish.

PIONEER TS-W307F/XCN/ES Owner's Manual

This manual has 2 pages, file size: 10.21 MB. It's available in languages: Portuguese, French, Arabic, English, Russian, Spanish, German, Chinese Simplified, Italian.