PDP-S40S
2
12
3
4
12
3
4
C
D
F
A
B
E
1. REASSEMBLY AND DISASSEMBLY PRECAUTIONS
* The grille ASSY is attached to the baffle by its bosses and dou
ble-sided self-adhesive tape.
To detach it, first remove the packing on the top of the unit.
Then pry it open little by little by inserting a flat blade screw
driver (covered with a cloth) into the slot between the grille
ASSY and the baffle.
* Be careful not to damage the grille ASSY by bending too much.
To re-attach it, press it to the baffle using new double-sided
self-adhesive tape.
Then, attach new packing on the top of the unit.
* The woofer is attached to the baffle by 4 internal screws.
To detach it, unfasten the 6 screws on the back of cabinet C.
Then, unfasten the 12 screws on the front of cabinet L. Do the
same for cabinet R.
When attaching, the plus terminal should be facing inward.
* The tweeter is attached to the baffle by 2 internal screws.
To detach it, unfasten the 6 screws on the back of cabinet C.
Then, unfasten the 12 screws on the front of cabinet L. Do the
same for cabinet R.
When attaching, the plus terminal should be facing upward.
* It is hard-wired between the input terminal and the network
ASSY. When detaching the Network ASSY, swing to pull it
out.
Grille ASSY
Cloth
Screwdriver(-)
Baffle
Slot
Grille ASSY
Baffle
Grille ASSY
Baffle
Tape
SEH1113
Baffle
Grille ASSY
Baffle
Packing
Network ASSY
1
2
1
Input terminal