ORDER NO.
PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER ELECTRONIC CORPORATION 1998
RRV2042
T-ZZW OCT. 1998 Printed in Japan
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
SPEAKER SYSTEM
S-A555
XE
S-A550 XE
The cosmetic baffle is attached to the baffle by its bosses and
press-fitting. To detach it, pry it open by inserting a flat blade
screwdriver into the cosmetic baffle lower side. Be careful not
to damage the cosmetic baffle and cabinet in this case.
The woofer is attached to the baffle by 4 external screws. To
detach it, first remove the cosmetic baffle. Next unfasten those
screws. Then remove the woofer. When attaching it, face its
terminal downward.
The tweeter is attached to the spacer by inserting. To detach it,
first remove the cosmetic baffle. Next pull it off the spacer.
Then remove the tweeter. When attaching it, insert the tweeter
in the spacer.
These products are components of system.
For the operating instructions, refer to the service manual RRV2047 for XR-A660, XR-A550.
The midrange, together with the spacer, is attached to the
baffle by 2 external screws. To detach it, first remove the cos-
metic baffle. Next unfasten those screws and pull the midrange
and the spacer off. Then remove the midrange and the spacer.
When attaching it, first fit the boss into the hollow on the
spacer. Next the left one, face its terminal lower right. Then the
right one, face its terminal lower left. When attaching the
spacer, fit the boss into the hole on the baffle. Then fasten the
midrange and the spacer together.
