ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2008
S-CX303-K
RRV3800
T-ZZR JULY 2008 Printerd in Japan
SPEAKER SYSTEM
S-CX303-K
/XTM/E
1.1 FRONT SPEAKER
The grille is attached to the cosmetic baffle by 4 catches.
Detach by pulling it toward you.
The cosmetic baffle is attached to the baffle by press fitting.
To detach it, pry it open by inserting a flat blade screwdriver into lower side slot.
The woofer is attached to the baffle by 4 external screws.
The tweeter is attached to the cosmetic baffle by 2 internal screws.
To detach the speaker unit, first remove the cosmetic baffle. Next unfasten those screws. Then remove the connecting cord.
When attaching the woofer, face its terminal toward the upward.
1.2 SUBWOOFER
The base cover is attached to the base by press fitting.
To detach it, pry it open by inserting a flat blade screw driver into back side slot.
The base is attached to the cabinet by 4 external screws.
When detatch it, first remove the base cover. Next unfasten those screws.
The speaker unit is attached to the cabinet board by 4 external screws. To detach it, unfasten those screws.
1. REASSEMBLEY AND DISASSEMBLY PRECAUTION