ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2002
RRV2697
T ZZM OCT. 2002 Printed in Japan
S-DV1000ST
S-DV1000ST
SPEAKER SYSTEM
XTW/UC
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The grille is attached to the cabinet by its bosses. To detach it,
pry it open by inserting a flat blade screwdriver into the space
between the grille and the cosmetic top board.
The midrange is attatched to the baffle by 4 external screws.
To detach it, first remove the grille. Then unfasten those
screws. When attaching it, face its terminal leftward.
The tweeter is attached to the baffle by 2 internal screws. To
detach it, first remove the grille. Second remove the midrange
unit. Next remove the baffle board. Then unfasten those
screws. The baffle board is attached to the cabinet by 6 screws.
To detach it, unfasten those screws. When attaching the
tweeter, face its dent to the midrange side.
The network Assy is attached to the input terminal. To detach
it, first remove the grille. Second remove the midrange, Next
remove the baffle. Then remove it.
(Front / Surround SP)
The grille is attached to the cabinet by its bosses. To detach it,
pry it open by inserting a flat blade screwdriver into the space
between the grille and the cosmetic top board.
The midrange is attatched to the baffle by 4 internal screws. To
detach it, first remove the grille. Next remove the baffle board.
Then unfasten those screws. The baffle board is attached to the
cabinet by 8 screws. To detach it, unfasten those screws. When
attaching the midrange, face its big terminal to the tweeter side.
The tweeter is attached to the baffle by 2 internal screws. To
detach it, first remove the grille. Next remove the baffle board.
Then unfasten those screws. The baffle board is attached to the
cabinet by 8 screws. To detach it, first unfasten those screws.
When attaching the tweeter, face its dent to the midrange side.
The network Assy is attached to the input terminal. To detach it,
first remove the grille. Next remove the baffle. Then remove it.
(Center SP)
Front
Surround
Front
Surround
Center
65S
This service manual is intended for qualified service technicians; it is not meant
for the casual do-it-yourselfer. Qualified technicians have the necessary test
equipment and tools, and have been trained to properly and safely repair complex
products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability
of the product and may void the warranty. If you are not qualified to perform the
repair of this product properly and safely, you should not risk trying to do so and
refer the repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals
which are known to the state of California to cause cancer, birth defects or other
reproductive harm.
Health & Safety Code Section 25249.6 Proposition 65
S-DV1000ST XJC/E
