2
S-DV272T
12
3
4
C
D
F
A
B
E
1
23
4
1. REASSEMBLY AND DISASSEMBLY PRECAUTIONS
1.1 FRONT, SURROUND SPEAKER
GRILLE
The grille is attached to the cabinet by its bosses applied with
adhesive. To detach it, pry it open by inserting a flat blade
screwdriver into lower right and lower left slot. To attach it, apply
adhesive to the holes on the baffle. Then press it to the baffle.
CAUTION
There are 12 bosses for press-fitting at the grille. To detach the
grille, remove in order from lower bosses. (Refer to the figure
in page 4.) In order not to damage the bosses, don't remove it
forcibly. Pry it open little by little. Be sure to insert a flat blade
screwdriver from just beside of its bosses.
WOOFER
The woofer is attached to the baffle by 4 external screws. To
detach it, unfasten those screws. To detach it, first remove the
grille. Then remove the screws. When attaching it, face its
terminal downward.
TWEETER
The tweeter is attached to the baffle by 3 external screws. To
detach it, unfasten those screws. To detach it, first remove the
grille. Then remove the screws. When attaching it, face its
terminal leftward and rightward.
COSMETIC PANEL
The cosmetic panel is attached to the baffle by its bosses. To
detach it, pry it open by inserting a flat blade screwdriver into
lower slot. To detach it, first remove the speaker stand base and
grille. Then remove the cosmetic panel. When attaching it, fit the
boss into the hole on the baffle.
SPEAKER STAND BASES
The speaker stand base is attached to the bottom of cabinet by 3
external screws. To detach it, unfasten those screws. Attach the
speaker stand bases to the stems using the screws provided. Once
you have aligned the stem and base, secure with the small screws
at the points shown below. Note that the speaker should face in the
direction of the base of the isosceles triangle (outlined below).
1.2 CENTER SPEAKER
GRILLE
The grille assy is attached to the cabinet by 8 external screws. To
detach it ,unfasten those screws.
SPEAKER UNIT
The speaker unit, together with the grille assy, is attached to the
cabinet by 4 external screws. To detach it, first remove the grille
assy. Next remove the cabinet. Then remove the cable. When
attaching it, face its terminal toward the leftward.
Speaker Stand Base
Stem
(the bottom of cabinet)
Front
Rear
