ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2005
RRV3151
T ZZK MAY 2005 Printed in Japan
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
CS Assy ( Subwoofer )
The cosmetic baffle assy is attached to the cabinet by its bosses.
To detach it, first remove the stand. Next pry it open by insert-
ing a flat blade screw driver into lower slot.
To attach it, press it to the cabinet.
The stand is attached to the cabinet by 6 external screws.
To detach it, unfasten those screws.
The speaker unit is attached to the cabinet by 4 external screws.
To detach it, first remove the stand. Then unfasten those
screws.
When attaching it, face its terminal toward the back board.
The input terminal is attached to the back board by press-fit-
ting.
To detach it, pry it open by inserting a flat blade screwdriver
into the lower side.
When attaching it, the red terminal is right-side.
CS Assy ( Front )
The grille assy is attached to the cabinet by 4 external screws.
To detach it, unfasten those screws.
The speaker unit, together with the grille assy, is attached to the
cabinet by 4 external screws.
To detach it, first unfasten those screws. Next remove the cabi-
net. Then remove the cable.
When attaching it, face its terminal downward.
CS Assy ( Surround )
The grille assy is attached to the cabinet by its bosses. To de-
tach it, pry it open by inserting a flat blade screw driver into
lower slot.
To attach it, press it to the inner baffle.
The speaker unit is attached to the inner baffle by 4 external
screws.
To detach it, first remove the grille assy. Next unfasten those
screws, and remove the cable.
When attaching it, face its terminal downward.
The input terminal is attached to the cabinet by internal screw.
To detach it, first remove the grille assy and the inner baffle.
Next unfasten this screw, and remove the cable.
CS Assy ( Center )
The grille assy is attached to the cabinet by 8 external screws.
To detach it ,unfasten those screws.
The speaker unit, together with the grille assy, is attached to the
cabinet by 4 external screws.
To detach it, first remove the grille assy. Next remove the cabi-
net. Then remove the cable.
When attaching it, face its terminal toward the input terminal.
The input terminal is attached to the cabinet by internal screw.
To detach it, first remove the grille assy. Next unfasten this
screw, and remove the cable.
SPEAKER SYSTEM
S-DV333
XJC/E
S-DV333 XJC/NC
Front
Sub Woofer
Center
Surround
