ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2005
RRV3127
T ZZR APR. 2005 Printed in Japan
S-DV340ST
XTW/EW
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
CS Assy ( Front Speaker )
The grille assy and the cosmetic plate assy are attached to the
cabinet by 9 external screws. To detach the grille assy and the
cosmetic platen assy, first remove 3 screws of a connection part
with the Base Assy. Next remove 2 screws of the cosmetic plate
Assy lower side. Next remove 7 screws of the cabinet. Then
carefully disconnect the wires of the woofer mounted on the
grill assy and input terminal.
To detach the cosmetic plate Assy, remove 2 screws of connec-
tion part with grille Assy.
The woofer is attached to the grille assy by 4 internal screws.
To detach it, unfasten there screws. When attaching it, face its
terminal upward.
When exchange the tweeter, do it with the grille assy.
CS Assy ( Surround Speaker )
The grille assy is attached to the cabinet by its bosses. To de-
tach it, pry it open by inserting a flat blade screw driver into
downside of it.
The speaker unit is attached to the inner baffle by 4 external
screws.
To detach it, first unfasten those screws. Next remove the cable.
When attaching it, face its terminal downward.
CS Assy ( Center Speaker )
The grille assy is attached to the cabinet by 8 screws. To detach
it ,unfasten those screws.
The speaker unit, together with the Grille, is attached to the
cabinet by 4 external screws.
To detach it, unfasten those screws. To detach it, first remove
the cabinet. Then remove the cable.
When attaching it, face its terminal toward the input terminal.
CS Assy ( Subwoofer )
The grille assy is attached to the cabinet by press-fitting with
adhesive. To detach it, pry it open by inserting a flat blade
screwdriver into downside of it. To attach it, clean the press-
fitting part and apply a bit of adhesive . Then press it to the
baffle.
The woofer is attached to the baffle by 4 external screws.
When attaching it, face its terminal rightward.
SPEAKER SYSTEM
S-DV340SW XTW/EW
Front
Sub Woofer
Surround
Center
