ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2006
RRV3416
T ZZS JUNE 2006 Printed in Japan
1. REASSEMBLY AND DISASSEMBLY PRECAUTIONS
FRONT / SURROUND SPEAKER
The grille is attached to the cabinet by 6 external screws. To
detach it, unfasten those screws.
The speaker unit, together with the grille, is attached to the
cabinet by 4 external screws. To detach it, first unfasten those
screws. Next remove the cabinet. Then remove the cable. When
attaching it, face its terminal downward.
SPEAKER SYSTEM
Front
Subwoofer
Surround
Center
CENTER SPEAKER
The grille assy is attached to the cabinet by 8 external screws.
To detach it, unfasten those screws.
The speaker unit, together with the grille assy, is attached to the
cabinet by 4 external screws. To detach it, first remove the
grille assy. Next remove the cabinet. Then remove the cable.
When attaching it, face its terminal toward the input terminal.
SUBWOOFER
The speaker unit is attached to the back board by 4 external
screws. To detach it, unfasten those screws. When attaching it,
face its terminal rightward.
The cosmetic baffle assy is attached to the baffle board by its
bosses applied with adhesive. To detach it, pry it open by in-
serting a flat blade screwdriver into lower slot. To attach it, ap-
ply adhesive to the holes on the baffle board. Then press it to
the baffle board.
S-DV353
XJC/E
S-DV353 XJC/NC