PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE INC.
P.O.Box 1760, Long Beach, CA 90801-1760 U.S.A.
PIONEER EUROPE NV
Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE.LTD. 253 Alexandra Road, #04-01, Singapore 159936
C PIONEER CORPORATION 2001
K-ZZA. MAY 2001 Printed in Japan
ORDER NO.
CRT2688
DVD PLAYER
SDV-P7
UC,EW,ES/RC,ES/RD
Service
Manual
- This service manual should be used together with the following manual(s):
Model No.
Order No.
Mech. Module Remarks
CX-954
CRT2670
MS2
DVD Mech. module:Circuit Description, Mech.Description, Disassembly
CONTENTS
1. SAFETY INFORMATION ............................................2
2. EXPLODED VIEWS AND PARTS LIST .......................4
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM ...18
4. PCB CONNECTION DIAGRAM ................................46
5. ELECTRICAL PARTS LIST ........................................58
6. ADJUSTMENT..........................................................67
7. GENERAL INFORMATION .......................................89
7.1 DIAGNOSIS ........................................................89
7.1.1 DISASSEMBLY .........................................89
7.1.2 CONNECTOR FUNCTION DESCRIPTION .......91
7.2 PARTS .................................................................92
7.2.1 IC................................................................92
7.2.2 DISPLAY ..................................................107
7.3 OPERATIONAL FLOW CHART .........................108
8. OPERATIONS AND SPECIFICATIONS...................109
SDV-P7/UC
- Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby
Laboratories.
- DVD Player Service Precautions
1.
Never adjust the LD VR in the pickup unit to protect the pickup from electrical damages.
2. For pickup unit(service)(CXX1530) handling, please refer to"Disassembly"(see page 89).
During replacement, handling precautions shall be taken to prevent an electrostatic discharge(set the short switch
of the pickup unit to the SHORT side).
3. During disassembly, be sure to turn the power off since an internal IC might be destroyed when a connector is
plugged or unplugged.
4. Please adjusting the skew after changing the pickup unit(see page 71).