ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2003
RRV2776
T ZZP JULY 2003 Printed in Japan
S-EV61V
S-EV61V
XJI/E
S-EV61V XJI/NC
SPEAKER SYSTEM
Surround
Front
Sub Woofer
Center
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The grille is attached to the cabinet by catches. Detach by pull-
ing it toward you.
The woofer is attached to the cosmetic baffle by 4 internal
screws. The cosmetic baffle is atached to the cabinet by 4 exter-
nal screws and 2 bosses. To detach it, first insert a sharp-
pointed tool like an eyeleteer into the catch and push up. Next
unfasten screws for the cosmetic baffle and pry it open by in-
serting a flat blade screwdriver between the cosmetic baffle and
the cabinet. Then unfasten those screws.
When attaching the woofer, face its terminal downward. When
attaching the cosmetic baffle, fit its boss into the hole on the
cabinet.
The tweeter is attached to the cosmetic baffle by 2 internal
screws. The cosmetic baffle is atached to the cabinet by 4 exter-
nal screws and 2 bosses. To detach it, perform same as the
woofer.
(Front SP)
The grille assy is attached to the cabinet by external screws (8
screws for center SP, 4 screws for surround SP) from backside.
The Speaker is attached to the grille by 4 internal screws. To
detach it, first unfasten screws for the grille and the cabinet.
Then unfasten those screws.When attaching it, face its terminal
horizontal. When attaching the grille after connecting the cord,
face its terminal toward the cord of the cabinet.
(Center SP and Surround SP)
(Sub Woofer)
The woofer is attached to the back board by 4 external screws.
To detach it, unfasten those screws.
The input terminal is attached to the back board of the cabinet
together with the adhesive by press-fitting. To detach the input
terminal, pry it open by inserting a flat blade screwdriver into
the upper and lower slot of the input terminal. To attach the
input terminal, replace it on the back board of the cabinet cor-
rectly together with the adhesive by press-fitting. (The red ter-
minal is right-side.)
The cosmetic baffle is attached to the baffle of the cabinet by
press-fitting. To detach the cosmetic baffle, pry it open by in-
serting a flat blade screwdriver into the lower slot of it. To at-
tach the cosmetic baffle, replace it on the baffle of the cabinet
by press-fitting.
