ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2006
RRV3423
T ZZS JUNE 2006 Printed in Japan
SPEAKER SYSTEM
1. REASSEMBLY AND DISASSEMBLY PRECAUTIONS
1.1 FRONT and SURROUND SPEAKER
The grille assy is attached to the cosmetic baffle by catches.
Detach by pulling it toward you.
The catch is attached to the cosmetic baffle by press-fitting. To
detach it, insert a sharp-pointed tool like an eyeleteer into each
of side. To re-attach it, insert the holes of the cosmetic baffle
assy by press-fitting.
The cosmetic baffle is attached to the inner baffle by its bosses.
To detach it, pry it open by inserting a flat blade screwdriver
into lower side.
The woofer is attached to the inner baffle by 4 screws with the
screw heads facing the baffle. To detach it, first remove the cos-
metic baffle, next disconnect the cord to tweeter. Then unfasten
those screws. When re-attaching it, face its terminal upward.
The tweeter is attached to the cosmetic baffle by 2 internal
screws. To detach it, first remove the cosmetic baffle, next dis-
connect the cord to tweeter. Then unfasten those screws. When
re-attaching it, face its terminal downward.
Front
Center
Surround
Subwoofer
S-EV9V
XJM/E
S-EV9V XJM/NC
1.2 CENTER SPEAKER
The grille assy is attached to the cabinet by 8 external screws.
To detach it, unfasten those screws. When re-attaching it, the
connection cord should pass along the back side of the speaker
unit.
The speaker unit is attached to the grille by 4 internal screws.
To detach it, first remove the grille assy. Next unfasten those
screws, and remove the cable. When re-attaching it, face its ter-
minal leftward. (See to the backside of the grille assy.)
1.3 SUBWOOFER
The cosmetic baffle is attached to the cabinet by its bosses. To
detach it, pry it open by inserting a flat blade screwdriver into
lower slot. To attach it, clean the press-fitting part and apply a
bit of adhesive . Then press it to the baffle.
The woofer is attached to the back board of cabinet by 4 exter-
nal screws. To detach it, unfasten those screws. When re-at-
taching it, face its terminal upward.
