ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2001
c
S-HTD1
RRV2456
T ZZV MAY 2001 Printed in Japan
SPEAKER SYSTEM
XMD/EW
XJC/E
XJC/NC
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The grille assy is attached to the cabinet by its bosses applied
with adhesive. To detach it, pry it open by inserting a flat blade
screwdriver into lower slot. To attach it, apply adhesive to the
holes on the baffle. Then press it to the bafle.
The woofer is attatched to the baffle by 4 external screws. To
detach it ,unfasten those screws. When attaching it, face its ter-
minal downward.
The tweeter is attached to the baffle by 2 external screws. To
detach it ,unfasten those screws. When attaching it, face its ter-
minal downward.
(Front SP)
Component
System
Service Manual
Remarks
DVD SURROUND SYSTEM
X-HTD1
DVD RECEIVER
XV-HTD1
RRV2460
SPEAKER SYSTEM
S-HTD1
RRV2456
This service manual
This product is component of system.
The woofer is attached to the rear baffle by 4 external screws.
To detach it ,unfasten those screws. When attaching it, face its
terminal rightward.
(Sub Woofer)
The grille assy is attached to the cabinet by its bosses applied
with adhesive. To detach it, pry it open by inserting a flat blade
screwdriver into lower slot. To attach it, apply adhesive to the
holes on the baffle. Then press it to the bafle.
The speaker is attached to the baffle by 4 external screws. To
detach it ,unfasten those screws. When attaching it, face its ter-
minal leftward or rightward.
(Center SP)
The grille assy is attached to the cabinet by its bosses applied
with adhesive. To detach it, pry it open by inserting a flat blade
screwdriver into lower slot. To attach it, apply adhesive to the
holes on the baffle. Then press it to the bafle.
The speaker is attached to the baffle by 4 external screws. To
detach it ,unfasten those screws. When attaching it, face its ter-
minal downward.
(Rear SP)
