2
S-IC631-LR
12
3
4
C
D
F
A
B
E
1
23
4
1. REASSEMBLY AND DISASSEMBLY PRECAUTIONS
· The grille is inserted into the baffle. To detach it, insert the grill
removal tool into each of the 4 corner holes of the grille net and
pull it out carefully.
· The sub frame is attached to the baffle frame by 4 external
screws. To detach it, unfasten those screws. (for S-IC631-LR)
· The crossover networks is attached to the speaker frame by 3
external screws. To detach them, first disconnect the speaker's
wires.
Next remove the speaker frame. Then unfasten those screws.
· The woofer is attached to the baffle frame by 4 external screws.
To detach it, unfasten those screws. When re-attaching it, face its
terminal downward.
· Attach the speaker frame to the wall /ceiling, and
tighten the screws lightly (temporary attachment).
At this point the rotating clamp will rotate so that the rotating
clamp and frame are clamped on to the wall/ceiling.
Gently try pulling the speaker forward and check that all of the
rotating clamps have rotated outwards and are lightly clamping
to the wall/ceiling.
· Tighten the screws firmly using no more than the
maximum torque specified.
Allowable maximum torque: 1.0 N.m
Screw
Speaker frame
Rotating clamp