S-IS22S
2
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The woofer is attached to the inner baffle by 4 external screws.
To detach it, first remove the cosmetic baffle assy. To detach
the cosmetic baffle assy, pry it open by inserting a flat blade
screwdriver into the lower slot of it.
To detach the woofer, carefully disconnect the wires of the
woofer mounted on the network assy.
To attach the woofer, face its terminal upward and fit the boss
of the frame to the hole on the inner baffle, then fasten those
screws.
The mid-range is attached to the cosmetic baffle assy by 2 inter-
nal screws.
To detach it, first remove the cosmetic baffle assy. To detach
the cosmetic baffle assy, pry it open by inserting a flat blade
screwdriver into the lower slot of it.
To detach the mid-range, carefully disconnect the wires of the
mid-range mounted on the network assy and the wires of the
tweeter mounted on the cosmetic baffle assy by adhesives.
To attach the mid-range, face its terminal downward and then
fasten those screws.
The tweeter is attached to the cosmetic baffle by adhesives.
To exchange the tweeter, do it with the cosmetic baffle assy.
The input terminal is attached to the back board of the cabinet
by press-fitting.
To detach the input terminal, pry it open by inserting a flat
blade screwdriver into the upper and lower slot of the input ter-
minal.
To attach the input terminal, replace it on the back board of the
cabinet correctly by press-fitting. (The red terminal is right
side.)
(Woofer)
(Mid-Range)
(Tweeter)
The network assy is attached between the loudspeakers and the
input terminal.
To detach it, first remove the cosmetic baffle assy. To detach
the cosmetic baffle assy, pry it open by inserting a flat blade
screwdriver into the lower slot of it. Then remove the woofer
and the mid-range speaker. To detach the each speaker, care-
fully disconnect the wires of the each speaker mounted on the
network assy.
To detach the network assy, carefully disconnect the wires to
the input terminal.
To attach the network assy, replace it in the cabinet correctly.
The grille is attached to the cosmetic baffle assy by catches.
Detach by pulling it toward you. To attach it, insert to the
catches on the cosmetic baffle assy. Then press it to the cos-
metic baffle assy.
The catch is attached to the cosmetic baffle assy by press-fit-
ting. To detach it, insert a sharp-pointed tool like an eyeleteer
into each of iside. To attach it, insert the holes of the cosmetic
baffle assy by press-fitting.
The cosmetic baffle assy is attached to the inner baffle of the
cabinet by press-fitting.
To detach the cosmetic baffle assy, pry it open by inserting a
flat blade screwdriver into lower slot of the cosmetic baffle
assy. Then carefully disconnect the wires of the mid-range
mounted on the network assy.
To attach the cosmetic baffle assy, replace it on the inner baffle
of the cabinet by press-fitting.
(Input Terminal)
(Network Assy)
(Grille)
(Catch)
(Cosmetic Baffle Assy)
