2
S-IW691L
12
3
4
C
D
F
A
B
E
1
23
4
1. REASSEMBLY AND DISASSEMBLY PRECAUTIONS
· The grille is inserted into the baffle. To detach it, insert a grill
removal tool into each of the 4 corner holes of the grille net and
push up carefully.
· The Speaker frame is attached to the wall by 8 external screws
with Rotating clamps. To detach it, unfasten those screws.
· The LPF network is attached to the speaker frame by 2 external
screws. To detach it, first disconnect the cord to speaker.
Next remove the baffle. Then unfasten those screws.
· The HPF network is attached to the CST chamber inside of
speaker frame by 3 screws.
To detach it, first detach CST and disconnect the cord to speaker
& LPF network.
· The CST speaker is attached to the baffle by 6 external screws.
To detach it, unfasten those screws. When reattaching it, face
Mid terminal (bigger) rightward.
· The woofers are attached to the baffle by 4 external screws.
To detach them, unfasten those screws. When re-attaching them,
face its terminal downward.
· Attach the speaker frame to the wall/ceiling, and
tighten the screws lightly (temporary attachment).
At this point the rotating clamp will rotate so that the rotating
clamp and frame are clamped on to the wall/ceiling.
Gently try pulling the speaker forward and check that all of the
rotating clamps have rotated outwards and are lightly clamping
to the wall/ceiling.
· Tighten the screws firmly using no more than the
maximum torque specified.
Allowable maximum torque: 1.0 N.m
Screw
Speaker frame
Rotating clamp
