ORDER NO.
PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 501 Orchard Road, #10-00 Wheelock Place, Singapore 238880
PIONEER ELECTRONIC CORPORATION 1998
RRV2030
T-ZZW OCT. 1998 Printed in Japan
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
This product is component of system.
For the operating instructions, refer to the service manual RRV1946 for XC-L7.
S-L7-K-LRW/XE consists of Satellite Speaker(2pcs) and Subwoofer(1pc).
SPEAKER SYSTEM
S-L7-K-LRW
XE
[ Satellite Speaker ]
The grille is attached to the cabinet by 4 external screws.
To detach it, unfasten those screws.
The speaker element, together with the grille is attached to the
cabinet by 2 external screws. To detach it, unfasten those
screws. When attaching it, face its terminal upper left.
The cabinet is attached to the baffle by 4 external screws.
To detach it, first remove the grille. Then remove the cabinet.
The input terminal is attached to the cabinet by 2 internal
screws. To detach it, first remove the grille and the baffle.
Then remove the input terminal.
The bushing is attached to the cabinet by press-fitting.
To detach it, first remove the grille. Then remove the bushing.
[ Subwoofer ]
The speaker element, together with the flange, is attached to
the back board by 4 external screws. To detach it, unfasten
those screws. When attaching it, face its terminal upward.
The duct is attached to the baffle by press-fitting. To detach it,
pry it open by inserting a flat blade screwdriver into lower side.
The input terminal is attached to the back board by press-fit-
ting. To detach it, pry it open by inserting a flat blade screw-
driver into lower side.
