2
SSP-LX03
12
3
4
C
D
F
A
B
E
1
23
4
1. REASSEMBLY AND DISASSEMBLY PRECAUTIONS
1.1 FRONT SPEAKER
The grille is attached to the cabinet by 8 external screws.
To detach it, unfasten those screws.
The 2 speaker units (52mm) is attached together with grille assy
to the cabinet by 8 external screws. To detach it, first unfasten
those screws.
Next remove the cabinet. Then remove the cable.
When attaching it, face its terminal right side.
The top panel is attached to the cabinet by press-fitting.
To detach, pry it open by inserting a flat head screwdriver into
back side hole.
When attaching it, press-fit it carefully it the direction of the
panel.
The top grille is attached to the speaker unit (Tw) by press-fitting.
To detach it, first pry top panel open by inserting a flat head
screwdriver into back side hole.
Then detach by pulling the top grille toward you.
When attaching it, press-fit it carefully it the direction of the
grille.
The speaker unit (Tw) is attached to the cabinet by 2 external
screws.
To detach it, first pry top panel open by inserting a flat head
screwdriver into back side hole.
Next detach by pulling the top grille toward you.
Next unfasten the screws. Then remove the cable.
When attaching it, face its (-) terminal front side
1.2 CENTER SPEAKER
The grille is attached to the cabinet by 4 external screws.
To detach it, unfasten those screws.
The speaker unit (52mm) is attached together with grille assy to
the cabinet by 4 external screws. To detach it, first unfasten those
screws.
Next remove the cabinet. Then remove the cable.
When attaching it , face its terminal right side.
1.3 SURROUND SPEAKER
The grille is attached to the cabinet by 4 external screws.
To detach it, unfasten those screws.
The speaker unit (52mm) is attached together with grille assy to
the cabinet by 4 external screws. To detach it, first unfasten those
screws.
Next remove the cabinet. Then remove the cable.
When attaching it, face its terminal right side.
The top panel is attached to the cabinet by press-fitting.
To detach, pry it open by inserting a flat head screwdriver into
back side hole.
When attaching it, press-fit it carefully it the direction of the
panel.
The top grille is attached to the speaker unit (Tw) by press-fitting.
To detach it, first pry top panel open by inserting a flat head
screwdriver into back side hole.
Then detach by pulling the top grille toward you.
When attaching it, press-fit it carefully it the direction of the
grille.
The speaker unit (Tw) is attached to the cabinet by 2 external
screws.
To detach it, first pry top panel open by inserting a flat head
screwdriver into back side hole.
Next detach by pulling the top grille toward you.
Next unfasten the screws. Then remove the cable.
When attaching it, face its (-) terminal front side.
1.4 SUBWOOFER
The stand board is attached to the cabinet by 4 external screws.
To detach it, unfasten those screws.
The plastic foot L & R is attached to the cabinet by 4 external
screws.
Then it is attached to the cabinet by its bosses applied with
adhesive.
To detach it, first remove the stand board.
Next detach by pulling it toward you.
To attach it, apply adhesive to the holes on the bottom board.
Then press it to the cabinet.
The speaker unit is attached to the cabinet by 4 external screws.
To detach it, first remove the stand board.
Then unfasten those screws.
When attaching it, face its terminal toward the acoustic felt.
