FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The cosmetic baffle assy is attached to the cabinet by 4 external
hexagon socket screws. To detach the cosmetic baffle assy,
loosen these screws by the hexagon screw driver. Then care-
fully disconnect the wires of the woofer and mid-range
mounted on the cosmetic baffle assy. To attach the cosmetic
baffle assy, replace it on the cabinet correctly and secure with
4 screws.
The woofer is attached to the cosmetic baffle assy by 4 internal
screws. To detach it ,unfasten these screws. When attaching it,
face its terminal downward.
The mid-range is attached to the cosmetic baffle assy by 2 inter-
nal screws. To detach it, loosen these screws. Then carefully
disconnect the wires of the tweeter mounted on the cosmetic
baffle assy by adhesion. To attach the mid-range, replace it on
the cosmetic baffle assy correctly and secure with 2 screws.
The network assy is connected to the input terminal. To detach
it, disconnect the wire from the input terminal. To attach the
network assy, connect the wire of the network assy to the input
terminal correctly.
When exchange the tweeter, do it with the cosmetic baffle assy.
( for Front Speaker)
( for Super Woofer)
The cosmetic baffle assy is attached to the cabinet by 4 external
hexagon socket screws. To detach the cosmetic baffle assy,
loosen these screws by the hexagon screw driver. Then care-
fully disconnect the wires of the woofer mounted on the cos-
metic baffle assy. To attach the cosmetic baffle assy, replace it
on the cabinet correctly and secure with 4 screws.
The woofer is attached to the cosmetic baffle assy together with
the cosmetic ring assy by 4 internal screws. To detach the
woofer(cosmetic ring assy), lossen these screws. To attach the
cosmetic ring assy, fit the notch of the cosmetic ring to the pro-
jection of the cosmetic baffle assy. To attach the woofer ,face
its terminal downward and upward. At this occasion, set the
terminal up-down direction so that the print label of the woofer
is right direction seeing from the speaker system front side. To
attach the cosmetic ring assy and woofer, replace it on the cos-
metic baffle assy correctly and secure with 4 screws.
The network assy is attached to the bottom board by one inter-
nal screw and adhesive. To detach it, unfasten that screw and
pry it out. To attach it, apply adhesive to the bottom board.
Then press it to the bottom board, and secure with one screw.
When attaching the network assy, do it carefully so that each
wire is not touched.
S-VS300VLRW
2
