ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2001
RRV2512
T-ZZM AUG. 2001 Printed in Japan
S-VS400V
XJI/E
S-VS400V XJI/NC
SPEAKER SYSTEM
This product is component of system.
System
Service Manual
Remarks
RRV2504
RRV2512
Component
X-VS400
XR-VS400
S-VS400V
COMPACT MINI COMPONENT
STEREO CD/VCD CASSETTE DECK RECIEVER
SPEAKER SYSTEM
This service manual
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The cosmetic baffle assy is attached to the cabinet by 4 external
hexagon socket screws. To detach the cosmetic baffle assy,
loosen these screws by the hexagon screw driver. Then care-
fully disconnect the wires of the woofer and mid-range
mounted on the cosmetic baffle assy. To attach the cosmetic
baffle assy, replace it on the cabinet correctly and secure with 4
screws.
The woofer is attached to the cosmetic baffle assy together with
the cosmetic ring assy by 4 internal screws. To detach the
woofer(cosmetic ring assy), lossen these screws. To attach the
cosmetic ring assy, fit the notch of the cosmetic ring to the pro-
jection of the cosmetic baffle assy. To attach the woofer ,face
its terminal downward. To attach the cosmetic ring assy and
woofer, replace it on the cosmetic baffle assy correctly and se-
cure with 4 screws.
The network assy is connected to the input terminal. To detach
it, disconnect the wire from the input terminal. To attach the
network assy, connect the wire of the network assy to the input
terminal correctly.
The mid-range is attached to the cosmetic baffle assy by 2 in-
ternal screws. To detach the mid-range, loosen these screws.
Then carefully disconnect the wires of the tweeter mounted on
the cosmetic baffle assy by adhesion. To attach the mid-range,
replace it on the cosmetic baffle assy correctly and secure with
2 screws.
When exchange the tweeter, do it with the cosmetic baffle
assy.