ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2000
RRV2339
T-ZZM JULY 2000 Printed in Japan
This product is component of system.
System
Service Manual
Remarks
- - - - -
RRV2340
RRV2339
RRV2332
Component
X-VS300SD
XR-VS300D
S-VS500VLR
- - - - -
COMPACT MINI COMPONENT
STEREO DVD CASSETTE DECK RECIEVER
SPEAKER SYSTEM
SPEAKER SYSTEM
This service manual
SPEAKER SYSTEM
S-VS500VLR
XJI/E
S-VS500VLR XJI/NC
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The cosmetic baffle assy is attached to the cabinet by 4 external
hexagon socket screws. To detach the cosmetic baffle assy,
loosen these screws by the hexagon screw driver. Then care-
fully disconnect the wires of the woofer or mid-range and
tweeter mounted on the cosmetic baffle assy. To attach the cos-
metic baffle assy, replace it on the cabinet correctly and secure
with 4 screws.
The woofer is attached to the cosmetic baffle assy together with
the cosmetic ring assy by 4 internal screws. To detach the
woofer (cosmetic ring assy), loosen these screws. To attach the
cosmetic ring assy, fit the notch of the cosmetic ring to the pro-
jection of the cosmetic baffle assy. To attach the woofer, face
its terminal downward. To attach the cosmetic ring assy and
woofer, replace it on the cosmetic baffle assy correctly and se-
cure with 4 screws.
The mid-range is attached to the cosmetic baffle assy by 4 inter-
nal screws. To detach it, unfasten those screws. When attaching
it, face its terminal downward.
The tweeter is attached to the cosmetic baffle assy by 2 internal
screws. To detach it, unfasten those screws. When attaching it,
face its terminal downward.
The network assy is attached to the bottom board by one internal
screw and adhesive. To detach it, unfasten that screw and pry it
out.To attach it, apply adhesive to the bottom board. Then press
it to the bottom board, and secure with one screw.When attach-
ing the network assy, do it carefully so that each wire is not
touched.
FRONT SP
SUPER WOOFER
X-VS500D
XR-VS500D
S-VS500VLR
S-A9LRC
