ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2004
RRV2933
T ZZP APR. 2004 Printed in Japan
S-VSL3
S-VSL3
XTW/E
SPEAKER SYSTEM
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
Port tube
Network Assy
The grille is attached to the cabinet by its bosses applied with
adhesive. To detach it, first unfasten 4 screws of the top plate.
Next detach the top plate with the packing. Then pry it open by
inserting a flat blade screwdriver into the grille upper side. To
attach it, first attach the top plate and packing by 4 screws. Next
apply adhesive to the holes on the baffle. Then press it to the
baffle.
The woofer is attached to the baffle by 4 external screws. To
detach it, unfasten those screws and turn it 45 degrees counter-
clockwise. When attaching it, face its terminal upward.
The tweeter is attached to the baffle by 3 external screws. To
detach it, unfasten those screws. When attaching it, face its ter-
minal downward.
The network assy is attached to the baffle by 4 internal screws.
To detach it, unfasten those screws. To detach it, remove the
grille. Then detach the baffle board (16 screws). To attaching it,
fit its hole into the hollow on the baffle.
Choke coil face downward
