ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2004
RRV3029
T ZZM SEPT. 2004 Printed in Japan
S-VSL6-2
S-VSL6-2
XCN
SPEAKER SYSTEM
Network Assy (SWN1707)
NETWORK ASSY
CHOKE COIL
BAFFLE
PORT TUBE
The grille is attached to the cabinet by its bosses applied with
adhesive. To detach it, pry it open by inserting a flat blade
screwdriver into the grille left-side and right-side slot. To at-
tach it, apply adhesive to the holes on the baffle. Then press it to
the baffle.
The woofer is attached to the baffle by 4 external screws.To
detach it, unfasten those screws. When attaching it, face its ter-
minal upward.
The tweeter is attached to the baffle by 3 external screws. To
detach it, unfasten those screws. When attaching it, face its ter-
minal horizontally.
The network assy is attached to the baffle by 4 internal screws.
To detach it, remove the grille. Then detach the baffle board(16
screws). When attaching it, fit the hole of the baffle board so
that the choke coil face downward.
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY