Cat. No. 002872
MKH 30 P 48
Microphones | RF Symmetrical Capsule
Condenser Microphone
General Description
The symmetrical transducer design of the figure-of-eight MKH 30 produces
an unusually wide and smooth frequency response. It is particularly suited
to soloists and small instrumental groups and can also serve as an `S'
microphone in MS stereo applications. As a support microphone it is
particularly useful in the effective suppression of sounds from adjacent
sound sources.
Features
j High rejection of lateral sounds
j Exceptionally low inherent self-noise
j Symmetrical transducer technology ensures extremely low distortion
j Transformerless and fully floating balanced output
j Switchable roll-off filter to compensate for proximity effects at a
distance of approx. 0.5 m
j Switchable pre-attenuation
j Black, anodised light metal body
j Delivery includes: 1 MKH 30, 1 MZS 80 shock mount,
1 MZW 41 windshield
Recommended Accessories
j MZA 14 P 48 U battery power supply unit
Cat. No. 002960
j MZT 441 table stand
Cat. No. 000799
j MZT 100 table stand
Cat. No. 001883
j MZD 30 dual clip, for MS stereo
Cat. No. 002990
j MZB 415 fish pole
Cat. No. 000972
j MZS 80 shock mount
Cat. No. 003685
j MZW 41 foam windshield
Cat. No. 029681
j MZP 40 popshield
Cat. No. 003132
j MZS 20-1 shock mount
Cat. No. 003609
j MZW 20-1 basket windshield
Cat. No. 003606
j MZH 20-1 hairy cover
Cat. No. 003610
Technical Data
Pick-up pattern ..........................................................figure-of-eight
Frequency response ................................................. 40 20,000 Hz
Sensitivity (free field, no load, 1 kHz)......... 25 (8) mV/Pa ± 1dB
Nominal impedance ................................................................. 150
Min. terminating impedance ..................................................... 1 k
Equivalent noise level
A-weighted (DIN IEC 651)............................................... 13 (19) dB
CCIR-weighted (CCIR 468-3)........................................... 22 (28) dB
Max. sound pressure level ......................... 134 (142) dB at 1 kHz
Power supply ........................................................phantom 48 ± 4 V
Supply current............................................................................. 2 mA
Dimensions ................................................................ Ø 25 x 174 mm
Weight ...........................................................................approx. 110 g
Values in parentheses with attenuator switched on (10 dB)
Cable pictured is an accessory not supplied with the microphone
Profile
Figure-of-eight studio directional microphone with switch-
able pre-attenuation and switchable roll-off filter. Frequency
response 40 20,000 Hz, sensitivity (free field, no load)
25 (8) mV/Pa ± 1 dB at 1 kHz, nominal impedance 150
,
min. terminating impedance 1 k
, equivalent noise level
A-weighted 13 (19) dB, CCIR-weighted 22 (28) dB, max. SPL
134 (142) dB at 1 kHz, phantom powering 48 ± 4 V, supply
current 2 mA, dimensions Ø 25 x 174 mm, weight approx. 110 g.
Values in parentheses with attenuator switched on (10 dB).
Effect of switchable roll-off filter
