2
Important safety instructions
The MX W1 has been manufactured according to the accepted rules
of safety and current technology. However, there is still a danger of
damage to equipment if the following general safety instructions
are not complied with.
·
Please read these instructions for use carefully and completely
before using the devices.
·
Make these instructions for use easily accessible to all users at all
times. Always include these instructions for use when passing
the devices on to third parties.
·
Do not use the devices in situations which require special
attention (e.g. in traffic or when performing skilled jobs).
·
Always keep the devices dry and do not expose them to extreme
temperatures (normal operating temperatures: 0 °C to 40 °C).
·
Use the devices with care and store them in a clean, dust-free
environment.
·
Switch off the devices after use to conserve battery power.
Remove the batteries if the earphones will not be used for
extended periods of time.
·
Do not listen to high volume levels for long periods of time as
this can lead to permanent hearing defects. Set the volume of
the connected audio device to the minimum before switching
the earphones on. Then increase the volume to the lowest
comfortable volume.
·
Use only the Sennheiser supplied MX W1 charging cable and
power supply unit. Never use the power supply unit for purposes
other than stated in this instruction manual.
Intended use of the devices
Appropriate use of the devices includes:
·
having read and understood these instructions, especially the
section "Important safety instructions",
·
using the devices within the operating conditions and
limitations described in this instruction manual.
